eCtune

hey everyone, imi having trouble with a d16z6 with p07 pistons and a xenocron 4bar map the thing is the car has evo 3 injectors which are 510cc, and i cant get it to idle properly, at the moment the car has a walbro fuel pump and the stock fuel pressure regulator. When i start the basemap i use dsm ...

contact vendor and in emulator info, serial you have to put the serial number the vendor gices you,happened to me once

sorry to thread jack, but im using a lc1 and couldnt you just reprogram the wb to give 0.1-3.57v ??? would it be good that way

the number that is on the underside of the demon, i mean the opposite side of the battery? i entered the demon licence that xenocron sent me

should the j12 be fully removed? also i checked the cn2 port and it looks like its welded properly, the last thing would be the cable also does ectune pairs up to a certain demon, i had another one, and with the last one had no trouble, could this be what is giving me trouble?

well i tried as the wiki says and the leds are working normal, red led turns off when emulator is conected and the green one is flashing, could this be an issue with the license? i had another demon installed before this one, i un installed and put the new demon inside it do i need to send calvin th...

i will check the led status, but in the meantime here are some pics of the setup

ok thanks, 74hc is in but maybe there is a bad solder in there ill check anyways

ok ill check that out tomorrow, anything in particular i should look for, or should i desolder the whole thing and resolder it

hello, i opened a thread in general comments, but here are my troubles, the car starts but only revs to 4000 rpm, and demon will connect to my laptop but wont datalog what can it be, i tested conection in settings and said demon found in com5

ran out of time,was getting issues with the throttle cable it didnt line up properly, was starting to get the fuel to a decent level, ill try and get some more time, and go with better plugs

i forgot were at 5500 ft above sea level and here is the cal

this is the picture of the dynotune we gave my friends eg6 jdm, today i duno if its low hp but guys with hondata seem to be geting lower numbers, it only has an exhaust, and intake, no headers or any other thing

yes a stock p30 ecu

i put on a stock p30 and it doesnt do it it works fine