eCtune

Nice! Congratulations!

glove wrote:i got mine to work again. Force update, "get" from ostrich save as file close ectune open ectune open file "put" in ostrich verify voila.

Thanks I did it this way and now it works.

fuel cut still dosent work for me. force updated yesterday 6/2 didnt make any changes to my .cal put base rom and calibration went for a test drive and the car backfires and pops when I let off the throttle and decelerate. fuel cut was working before the update.

Just tried it and it is working now.

Yes selected innovate and chose correct port, com8.

I updated to r7 I try to connect datalog with Innovate serial wideband input enabled, datalog connects but O2 reading display stays at 10afr. Close ectune and opened up logworks. It connects and displays the AFR. Tried disabling then enabling, tried switching ports, rebooting laptop but it still dos...

mine is greyed out also.

Nice!

Had that happen to me a few years ago when my motor was first built. A shop built my motor, I put it in the car and went straight to the dyno. VTEC wasnt working, checked everything and all checked out good. Decided to pull the head off and found out the oil passage was welded shut and head machined...

wow mean!!

After a whole bunch of transmission problems and having the curse of the 11.0's I finally got my car back into the tens! Best run was a 10.76@ 142mph http://i33.photobucket.com/albums/d63/phil555_/IMG_1895.jpg My friend also tuned on ectune went a 10.9 spinning all the way down the track even with w...

VTEC is is set at 4800 and running stock cam gears. Im surprised the car made that much power. My friend wants to put bigger cams in. Any advice for setting the VTEC point is greatly appreciated.

looking through my datalogs boost is 32psi @ 7000 rpm then fluctuates between 30 and 32lbs until around 8600rpm then settles down to 30lbs. belive it or not its GSR cams heres more specs of the car: GE sleeved 84.5mm pauter rods arias pistons mildly ported head 1600cc RC injectors aeromotive fuel pu...

tuned my friends car a few days ago and got 700hp.Went to the track this weekend but best run was only a 11.0, car was spinning all the way down the track. built GSR full Race topmount manifold GT4088r Ectune!! boost wasint holding steady up top, using Greddy boost controller

now thats a sleeper!