eCtune

Parameters, Sensor/Hardware options -Disable STS(Starter Signal) input ...if you don´t have this option available, try pulling out B9 at the ECU. This is pure guesswork on my part, I haven´t seen this problem before, ever.... /Allan STS was disabled on the ECU - I de-selected this and the fuel pu...

JaredKaragen wrote:Settings-> overlay Set conditions

Thanx, figured that out On the map I'm using the ECT activation threshold was 76 degree C - which probably wan't met when I checked the Overlay functionality

Hi guys As I'm new to eCtune - I'm trying to figure out how to let the ECU log and input AFR readings from my wideband in the AFR \"log\" table (AFR estimated % change) From reading another post it seems like there is an activation threshold like temp etc. > Where should I be looking to make sure th...

Good you good the logging sorted out. The only reason I can see for the fuel pump to run constantly (when the Off-setting works) is if the ECU somehow thinks the car is cranking. Cranking is detected by the distributor sensors but also there´s a STS Starter Signal input that can be disabled... /Al...

Turns out my laptop was reading the Hulog as a Bluetooth radio (which it doesnt have drivers for) and thus not reading the Hulog properly I uninstalled the device and deleted its drivers, plugged in the Hulog and it installed the correct drivers. Opened up eCtune, connected Ostrich, setup correct co...

Fuel pump problem is new to me... Might be something going on... The hulog, suspect your cable (USB) and make sure it's jumped inside for Honda, but it's a USB error, either the cable, port or hulog itself. Red wire goes to pin1 on the ecu. Good your getting it sorted! As soon as the Emulator start...

Ok I've made some progress - although not 100% sorted yet 1) Jumper J12 is removed 2) Changed dip switches on Ostrich both to 28 and 28 3) Created a base rom and then Put Base rom and Calibration >> Car started :) , so it is now seeing and reading off the Emulator Problems still : 1) Fuel pump prime...

Just as usual, you need to connect your hulog or other datalogger to the ECU when using an Ostrich. There really is no magic way for the logger to connect using a ROM emulator only. If you want one device whicch logs AND emulates, there´s the Moates Demon which connects to both the ROM socket and ...

I'm going to explain the process I followed from the start 1) Received eCtune 2) Loaded software on Windows 7 machine 3) Managed to get the errors solved 4) Got the Ostrich to connect after a battle with the drivers 5) Received and copied 1st license 6) Received and copied 2nd license 7) Connect Ost...

Did you do a full upload to the Ostrich from eCtune? Does the ECU light flash differently from your old Crome? The thing is, until an eCtune ROM is in the ECU, you can´t connect to it. /Allan ill try to simplify a little. in ectune's emulator info pane; is your ostrich vendor set to ectune? or can...

Hi everyone I am having trouble with my eCtune setup. I have installed all the required licenses etc. Managed to get the Ostrich and software working on Windows 7 and now: eCtune connects to the Ostrich and shows that it is connected (Green)\However when I select \"Connect to ECU\" it tells me it ca...

So I'm having a mess of problems making eCtune work on my new Windows 7 netbook. I have UAC disabled but I still have numerous issues. I get this message "Moo2H Old Version!" so I try to run the Forced Updates and I get "Web Update Failed with Error: Access to Path 'C:\\program files\\ectune\\\\\\e...