Search found 22 matches
- Sat Jun 16, 2012 8:04 pm
- Forum: Dyno Results
- Topic: B18C 231whp
- Replies: 4
- Views: 8820
- Wed May 30, 2012 1:38 pm
- Forum: Automotive Tech
- Topic: Tuning on E85
- Replies: 2
- Views: 16302
- Wed May 16, 2012 1:52 pm
- Forum: Automotive Tech
- Topic: aem uego 0-5v output for a p28
- Replies: 4
- Views: 12254
Okay, so I think I am getting closer to the finish line of my big analog output question. I called one of the local performance shops that have tuned my car, and spoke with the tuner. The lead tuner said that the analog 0-5v analog output from the Uego that goes to the p28 says it doesn't work 90% o...
- Wed May 16, 2012 8:10 am
- Forum: Automotive Tech
- Topic: aem uego 0-5v output for a p28
- Replies: 4
- Views: 12254
So for example I can modify the stock Narrowband input that's 3.5v on the stock ECU throughout the ecTune software it'self right ? I don't know much about calibrating analog 0-5v outputs for the AEM Uego. I am still new to this stuff. This is what it says about configuring calibration outputs The AE...
- Tue May 15, 2012 11:40 pm
- Forum: Automotive Tech
- Topic: opinions on what kind of solder u guys use
- Replies: 1
- Views: 5593
opinions on what kind of solder u guys use
opinions on what kind of solder you guys use, and what size ... just curious ..
- Tue May 15, 2012 9:45 pm
- Forum: Automotive Tech
- Topic: aem uego 0-5v output for a p28
- Replies: 4
- Views: 12254
aem uego 0-5v output for a p28
I cannot find this question anywhere. I have searched everywhere on PGMFI.org and most people that are using a wideband on that website have had experience with \"ground references\" such as the LC-1, which uses this talked about strategy for delivering a signal to the p28 for AFR calibration for Re...
- Mon May 14, 2012 10:03 pm
- Forum: Automotive Tech
- Topic: Building a B18C1... DOHC here I come!
- Replies: 5
- Views: 13401
Haha! Very nice, plan to see this baby running. Keep us updated on the build. I just started my thing up yesterday sounds like a beast with that extra Piston to wall clearance that I have setup for a highway weekend monster. Then again, JE's are known for their noise nuisance and disrespected for th...
- Mon May 14, 2012 9:53 pm
- Forum: Automotive Tech
- Topic: AEM Uego Wideband \"Ground Offsets\"
- Replies: 4
- Views: 12344
Yes I am pretty sure there is a signal ground wire that comes straight out of the UEGO. Because of the fact when I was wiring the thing up to my car, I only connected the red and black wire to power up the \"display\" for the o2 sensor itself. Just to make sure the connection was secure, and the pro...
- Mon May 14, 2012 1:51 pm
- Forum: Automotive Tech
- Topic: AEM Uego Wideband \"Ground Offsets\"
- Replies: 4
- Views: 12344
This \"power ground\" that you are referring to is going to be the ground wire that powers up the display on the 02 wideband display gauge right ? its not going to be the wire that effects output voltage, because nothing is hooked up to my ecu for the wideband. Only power and ground, power is hooked...
- Sun May 13, 2012 2:12 am
- Forum: Automotive Tech
- Topic: Building a B18C1... DOHC here I come!
- Replies: 5
- Views: 13401
Why not ditch the GSR intake manny and go with a Type R one or a skunk 2 manny ? I've seen people sell the type R ones for like 150 on H-T. As far as notching the GSR girdle, nothing needs to be fabricated in that area to compensate for forged internals. There aren't any obstacles in your way of put...
- Sat May 12, 2012 10:53 pm
- Forum: Automotive Tech
- Topic: AEM Uego Wideband \"Ground Offsets\"
- Replies: 4
- Views: 12344
AEM Uego Wideband \"Ground Offsets\"
Here is a super noob question that I have been pondering about for my new setup regarding the AEM Uego wideband. My foundation in electrical is stable enough where I can read things over and over in order to fully understand and grasp the concept. When I'm explaining things, I get off board, and los...
- Sun May 06, 2012 5:35 am
- Forum: Software Support
- Topic: heres a weird question ..
- Replies: 3
- Views: 4700
Not doubting you, but now I am really confused. I called Xenocron last friday, and the guy guided me through the process but I didn't get a chance to go through the steps on my laptop since I didn't have an opportunity to get a hold of it while communicating with one of the staff members from Xenocr...
- Sun May 06, 2012 5:30 am
- Forum: Software Support
- Topic: how long does it take to get the xml document license ? :[
- Replies: 5
- Views: 15234
figured out the problem. Chris did e-mail me back, and asked me to look at the registration table when accessing the software. Found out that the vendor registered to the installed software that xenocron sent me has ectune labeled as the vendor, instead of xenocron. Perhaps this is one of the proble...
- Sat May 05, 2012 3:48 pm
- Forum: Software Support
- Topic: heres a weird question ..
- Replies: 3
- Views: 4700
heres a weird question ..
Maybe this is one of the reasons why I didn't receive my xml license in the mail ... hmmm ?? http://i813.photobucket.com/albums/zz51/mirzad1988/image.jpg I understand this is the ectune website, and staff is only involved with the ectune vendors, but I didn't get any opportunities to give xenocron a...
- Wed Apr 11, 2012 9:22 pm
- Forum: Software Support
- Topic: how long does it take to get the xml document license ? :[
- Replies: 5
- Views: 15234
how long does it take to get the xml document license ? :[
Waited about 3-4 weeks. Ordered my ectune license from xenocron but still no answer back from them. Anybody know how to get a hold of Chris at xenocron ?