eCtune

Try reposting the pictures if you can, curious about the cam gear setup as well. Really well done with those kind of mods!

90% duty cycle at 15 lbs. What are those injectors rated at ? 1000cc ? If they are, isn't that a little too rich even for boost.

Okay, so I think I am getting closer to the finish line of my big analog output question. I called one of the local performance shops that have tuned my car, and spoke with the tuner. The lead tuner said that the analog 0-5v analog output from the Uego that goes to the p28 says it doesn't work 90% o...

So for example I can modify the stock Narrowband input that's 3.5v on the stock ECU throughout the ecTune software it'self right ? I don't know much about calibrating analog 0-5v outputs for the AEM Uego. I am still new to this stuff. This is what it says about configuring calibration outputs The AE...

opinions on what kind of solder you guys use, and what size ... just curious ..

I cannot find this question anywhere. I have searched everywhere on PGMFI.org and most people that are using a wideband on that website have had experience with \"ground references\" such as the LC-1, which uses this talked about strategy for delivering a signal to the p28 for AFR calibration for Re...

Haha! Very nice, plan to see this baby running. Keep us updated on the build. I just started my thing up yesterday sounds like a beast with that extra Piston to wall clearance that I have setup for a highway weekend monster. Then again, JE's are known for their noise nuisance and disrespected for th...

Yes I am pretty sure there is a signal ground wire that comes straight out of the UEGO. Because of the fact when I was wiring the thing up to my car, I only connected the red and black wire to power up the \"display\" for the o2 sensor itself. Just to make sure the connection was secure, and the pro...

This \"power ground\" that you are referring to is going to be the ground wire that powers up the display on the 02 wideband display gauge right ? its not going to be the wire that effects output voltage, because nothing is hooked up to my ecu for the wideband. Only power and ground, power is hooked...

Why not ditch the GSR intake manny and go with a Type R one or a skunk 2 manny ? I've seen people sell the type R ones for like 150 on H-T. As far as notching the GSR girdle, nothing needs to be fabricated in that area to compensate for forged internals. There aren't any obstacles in your way of put...

Here is a super noob question that I have been pondering about for my new setup regarding the AEM Uego wideband. My foundation in electrical is stable enough where I can read things over and over in order to fully understand and grasp the concept. When I'm explaining things, I get off board, and los...

Not doubting you, but now I am really confused. I called Xenocron last friday, and the guy guided me through the process but I didn't get a chance to go through the steps on my laptop since I didn't have an opportunity to get a hold of it while communicating with one of the staff members from Xenocr...

figured out the problem. Chris did e-mail me back, and asked me to look at the registration table when accessing the software. Found out that the vendor registered to the installed software that xenocron sent me has ectune labeled as the vendor, instead of xenocron. Perhaps this is one of the proble...

Maybe this is one of the reasons why I didn't receive my xml license in the mail ... hmmm ?? http://i813.photobucket.com/albums/zz51/mirzad1988/image.jpg I understand this is the ectune website, and staff is only involved with the ectune vendors, but I didn't get any opportunities to give xenocron a...

Waited about 3-4 weeks. Ordered my ectune license from xenocron but still no answer back from them. Anybody know how to get a hold of Chris at xenocron ?