eCtune

yeah my fualt it was the uac bs

anybody know a fix for ectune for windows 7 64bit? says netframework error,netframework 3.5 wont install on windows 7 so is this not compatible im assuming?

Hey guys, I have a few questions. I put the gm 3bar map sensor few nights ago. Loaded up a basemap, started fresh and have a pretty decent tune going. 13.9 to 14.7 afrs crusing, low 11's to high 10's in boost. Now when i shift to the next gear, the wideband swings to 10 flat for a fraction of a seco...

bought an s300 problem solved

yeah iv done all that calvin and yeah im not a rookie at this,this is new funky weridnes to me iv tuned the car serval times with diffent engine setups since ectune made its debut and iv had same injectors and map sensor on a d seriers and that was a breeze.so why do you guys think it would be follo...

alright let me break it down, I had the car tuned pretty straight on my 560s and stock map tried to up the sensor to a 3 bar and loaded a new calibration to suppourt it and initaly its so damn lean it wont run at all just on base i tried messing with the injector offset but it screws the map way up ...

i get about 12.9 to 13.5 afrs at light load high way cruising, I know this is a little rich, but is it ok? Just dumping a little more gas.... right.. i know 14.5 is what i should be shooting for but i figure it would be fine, just gas mileage will suck.

great thankyou for the insight we are putting the 2 liter gsr hatch on the road friday. So all weekend i will have time to tunetagged up.

nice run ck! how much boost? and what size turbo? Looked like a pretty solid run

nice run ck! how much boost? and what size turbo? Looked like a pretty solid run

how much retard per lb of boost is on that map, your total timing is like 14 at redline if im correct?

so if injector offset is discontinued in the new rom, i will have to get my car to idle manually by tweaking the map? On boosted setups do you guys check disable ignition correction above 1031mbar? So what about overall fuel trim, will that be the easiet way in order to get the tune to idle upon sta...

alright ill take it off the rest of the gauges and ground it seperately

alright ill take it off the rest of the gauges and ground it seperately

ahhh so that is the box i use to tweak the afr when the lights turn on and my afr drops a whole point. Interesting. What increment of values should be put in here?