eCtune

JDracing in NB Canada. username on here is jdracing

it was a first for me

Was at a close buddies place and walk into the shop and he had a gen3 swapped mr2 straped to a p72 and running on ectune, only say it idiling and a few easy passes(13lbs) wasnt there for the final results discuss....

setup?

calvin wrote:wait till the next release u will have to retune though but you will happier;)(HINT)

Why is this? and when will the next release come out (i know r13 just came out, just curious)

Orthello wrote:But still I don't see a WB feed to the ECU. How is that done?

serial connection

ok

Probally not going to happen but anyway we could use ectune with portable apps?? seems as your licence is tied to your ostrich does it need to be tired to a pc as well? http://portableapps.com/ I always carry a usb drive with me and my ostrich/datalogging/wideband will always be in my car. this way ...

offset adjustment didnt work? you should have a final multiplier of 0.24 and then work with your injector offset adjustment to get the idle.

you could just keep it, but im sure they asked for your credit card? And ask them to put warranty replacement on the box. your customs office will probably refund you a second duty on the same product as long as its claimed warranty. just keep your receipts and boxes for the first one

Gaskleppie wrote:I do not remember how I did it, have to search...

let us know

In stock form the obd1 ecu d14 will only read ~3.8vdc and I nelieve the eld issue may be related to the 2 resistors I mentioned previously. Update: Changed labtops, It now has 15ms datalogging and its very fast and logs cells just like it should. We were still having problems with the voltage input ...

have you tried using a different wb input...d14?

There is a jumper in the ecu labled j12 it needs to be desoldered/removed for datalogging. check xenocron.com out there should be a DIY for ecu chipping and it will probally show illustrations.

Kr4nG wrote:what does removing j12 mean.

I dont know if youve done this or not and someone else will chime in here soon but if your using eld as an o2 input i believe you have to remove 2 resistors, R136 and R138. Ok I got it to speed up logging the air fuels in the tables a little but its still slow and could be the fact that we are tunin...