eCtune

Do I dowload and request license, then once I get, register ostrich? Or load pro_ostrich from old computer?

I thought the piece that goes through the IM was just a fitting that would easily come out. well it was previously broken so I took it out, not knowing, and ran a strait hose to the breather. I now know what a pcv valve actually is. I blocked off the intake mani, that brought idle to normal, and no ...

Thanks, that was it!

If I unplug IACV, rpms are 1-1.2k, but rapidly bouncy, no white smoke for 1-3min, then heavier. When plugged, rpms stay 2-2.3k, and gradually heavier`white smoke from exhaust. I'm thinking since new HG, and head with ARP HB's, disconnect coolant lines from TB and IACV and check start engine?...

what pcv valve?

No, but will try this morning. injector and battery offset? what's that to do?

Newly built motor. Gsr bottom rebuilt B16 head w/ crower S&R ITR Intake mani Stock Exhaust mani CTR cams Arp head bolt new head gasket B16 auto trans w/LSD LC-1 wideband wired into P30 ECU running stock Type R cal I got cel for IACV and primary O2 heater, disabled O2 and plugged up Iacv. after that ...

Is the car body manual or auto? When I did the manual to auto conversion n my 92 SI, I swapped everything over from my 94 EX auto. OBD1 auto trans are hydraulically controlled, OBD2 and up are electronic. the P28 auto ECU for(M24) would be preferred, but it depends on the trans model. Give more info...

Thanks for help'n guys!

why?

Can I install a 4bar senor with Pro, and be fine with a stock motor?

I'm running at stock P72.cal for ectune with fan enabled, auto tranny, disable vtec pressure, baro, knock, and injector test, Is this correct? I saw a post about battery ofset. just wondered

When I 1st put in KOEO position I get code 3, but CEL shut off like normal. Car starts like normal, run fine, then 3 miles later, I start to get power failure. Got a jump, and 1/4mi power failure again. repeated the same type of jump and same happened again. the time I jumped it, I let it charge lon...

Xenocron is near you in N.J. He sockets ECU's, sells the hardware-Ostrich, and He is a Ectune distributor and Tuner. He can get you together, unless you have someone local. I really enjoy my eCtune, It's a very good program that's affordable, user-friendly, and has online support.

I had to completely erase and reprogram my laptop. I previously had the Pro version, now its not acting right. I'm supposed to put the license in the eCtune folder in C; drive correct?