eCtune

Not to thread jack, but........ I'm having a similar issue. I just did an F20b swap in my 95 Accord(I'll do a quick write up on the swap soon). When the car is under a load, the idle real low, and when the a/c is on, the car feels like it's going to die, like if the iacv or the ecu is not compensati...

i have mine set a -9. Depends on the car, but that's around what it usually sets to.

I've also had this issue with my car for a long time, just never thought too much about it. But I'm having the exact same problem. I have a feeling that the iat is soaking up a lot of heat, and maybe the iat fuel compensations have to be tweaked to a \"certain extent\", I wouldn't know to what exten...

Looks like this is a going to be a hard project to do. I'm thinking of going with f20b pistons with the f22b2, which is going to give me a compression of 13.1.1. The other option is to go with f20a doch nonvtec pistons with either h22 or h23 rods, which will yield 12.3.1 compression. The hard part i...

I'm from Illinois, e85 is plenty available. Also, 93 octane is the highest octane rating fuel gas stations have, most of them. There ase some local stations that carry 100 octane. Thanks guys. I think no one else has tried this, so I'm in virgin territory here.

I called bisimoto's tech dept(thanks Julio for the help). They are real good people, and have great customer service skills. I was trying to get some 12.1 pistons on a stock bore(85mm), being that I'm in the process of scooping up a freshly re-sleeved f22b2 block, for the f22b2, but all they offer i...

Thanks Julio. I'll keep it in mind, for sure.

I found this compression calculator: http://www.zealautowerks.com/index.html and found engine spec as well: http://www.accordinglydone.com/forum/showthread.php?t=15402 Using both the f22b2 and f20b specs, according to the calculator, compression will be 13.1.1, with a piston-to-deck height of -0.500...

The reason I posted this is because I was complentating of going with f20b pistons on the f22b2 block. Thanks for looking.

by the way, these are comparissons between an f20b and a f22a. f22a's are the same thing as f22b2's. thanks.

Ok, I found this. If anyone has any experience with piston dimensions, please input here.... Thanks. F20B = open deck F22A = open deck DECK HEIGHT F20B = 219.5mm/8.643 F22A = 219.5mm/8.643 D BORE F20B block = 85mm/3.346 F22A block = 85mm/3.346 ROD LENGTH F20B = 145.0mm/5.709 F22A = 141.5mm/5.572 ROD...

Anyone? Any help would be appreciated.

Hello. I posted this originally on pgmfi.org, just trying to see if the experts here have and good feedback.... Hi, as the title states, I've been looking everywhere(bisimoto.com as well), trying to find high compression pistons for my 1995 Accord f22b2 block. I'm trying to get the pistons to be sta...

what spark plugs are you running? what type of fuel?

As far as E85 goes, what does everyone think of it? Is there any modifications to do on the fuel system for it to not take a sh*t, or is it a fill, tune, and go type of deal? I've tuned a couple of high compression, all motor hondas on e85, and so far so good......