eCtune

Just installed a \"new\" (different) compressor as my old one had a hole in it (my fault) as well as the drier and refilled the system. Everything was great until today. The A/c will kick on and off depending on the revs. If Im idling it will stay on and cycle normally but if you start to rev the en...

The bug that switches the boost control option NC/NO after close is still there. As in I select NC, and the program swaps it back to NO after saving and closing the program and reopening.

Worked fine for me mal

The AFR conversion does need to be tweaked. Depending on how you have your table setup, I always have to put in a higher value to get the value I want when it interpolates for those input boxes. Also, secondary lean protection, when activated, just kills power after like 3k regardless of settings la...

automatic

Ok just to clarify this, Im using 1 bleed, 2 wastegate, 3 source, which works NO (RIGHT NOW) for an INTERNAL wastegate, which is opposite an external wastegate as described in the xenocron instructions. So I SHOULD be selecting NC because the solenoid is NC from ports 1-2 but internal wastegate setu...

Edit: That instructions are correct it looks like

My problem is when i save and open the calibration, option NC is always set. And the description is still backwards for what you want it to do. When I went out to do pulls this is not the case. NO is working how it should (for me at least). Does that assume external wastegate or does it not matter?

Will do. Thanks

Just checked logs and the corrections are actually working. hmmm

Thats 14.5-15 degrees at 18psi, GT2560r on a sTock LS, Mid 11 afrs. I'll get some pics at the track this weekend.

WEll my camera can def. see better then me lol. Im thinking these are a little to old / I didnt shut the car down soon enough for an accurate reading. Is that the 'color change' on the ground strap after the bend, indicating to much timing?

Plugs I pulled after some runs today. They have probably around 7,000 miles on em. I'm gonna try and get fresh ones before this weekend when I go to the track.

At least lean protection is working otherwise Id be SOL... Sent calvin an email.

Yeah not working here, and a shift in temperature the other day caused my tune to be quite off because the software wasnt compensating...