eCtune

well its a dry kit .. and its got the zex box so when its active it increases the fuel pressure ... but i dont see how its injector its been running fine when i had it hooked up regular

ok i need help i finally got ectune controlling my zex kit ... im having an issue with melting and destroying #2 SPARK PLUG... this has never happend ever since ive been spraying. Whats weird is that every spark plug was perfectly fine black ring tan strap no hint of detonation ... afrs looked rich ...

just wondering so i can make quick adjustment... its going from a NA map to Nitrous map

oh its ok just wanted to make sure you hadnt forgot about it

any luck?

well im telling you that its greyed out want me to take a screen shot... it stays greyed out like that always it never changes

I cannot click on smart tracking... I want to be able to lock onto the cell during a load and be able to increase/decrease fuel with up down arrows and the smart tracking is greyed out

it's easy.. 2 relays... 1st relay that is wired to a GND swith turns power on to the zex box and give an INPUT on the ecu gnd that NOS/OUTPUT is active 2nd relay is used to send 5v to the zex box. You will have to program your zex box first. You will have to max it turn on by full TPS 4.xx V. When ...

well instead of doing what was said i instead did something else... i put ign lock to 0 then used the lines on my stock cam gears and lined up the two lines in the middle worked perfectly... im sure that is an acceptable way of doing it also can someone please confirm ?

Yep! Set the piston from cylinder 1 at its highest point and make your own mark at the crank/pulley/flywheel. Then use the timing tool at 0 degrees and check it with your own new made mark. ok i would need to find highest point cyl 1 is which is TDC.. then i would need to make a mark on the crank p...

At some cars its difficult to check the timing. So with this tool you can set the timing fixed to a certain vallue. This way you can even check the timing with a cold engine. All the variable's that can adjust the timing at idle are disabled when you use the timing tool. Or when an engine does not ...

so i could hook up the output in ectune to PCS (purge valve) A20 to the tps input wire on the zex box and it will work fine? well to clarify what voltages do these outputs put out ? 0-5volt and inverted 5-0 volts?

Ive been looking everywhere for directions on how to hook up the zex box. I can only find directions to hook up regular solenoids. So my question is how can i wire up to activate the box? It activates now on TPS voltage. Is there any outputs i could wire to that would output 5volts when active?

yes

1337EJ1 wrote:My eCtune is locked too now... I buy it on 23/12/08

i bought pro on 12/23/08 also and still havent recieved my license. When did you get your license