eCtune

For some odd reason I was out this weekend finally going to tune boost and I went into boost for the first time and went to look at the A/F log...nothing. It won't log anything in the boost section. Tried it a couple times, went through my settings and everything is the same as it always was so I du...

If you got the e-mail with the serial ID for the demon, then just install everything on the new laptop and open the emulator info window, click on serial and copy and paste the number from the e-mail in the box and you should be good to go.

Why did you choose a vtec map for a non vtec motor?

Same issue here. Is there something going on with the EBC? A friend of mine has been having problems with it as of late.

I always got 14 volts at idle. Cruising at speed voltage will drop to low 12's and back up low 14's without changing engine speed. 2 different cars with good charging systems with the same problem, that's my point.

Took the car on a nice long ride today and while I got stuck in a little traffic I noticed my battery voltage datalogging was going from 12.16 volts or so up to 14+volts as I started moving again. Thing is, I never had a problem with the charging system. Also, looking through a friends datalogs the ...

You will get an e-mail when you're supposed to update.

Check com port settings

I ran another force update when I made this post but I haven't tried it yet. Anyways here is the screen shot...

Or you can just wait until you get the e-mail that tells you to update

jpjackson wrote:do you have the overlay set to overlay in gear 0?

Yep...I triple checked all my settings before I posted just to make sure I didn't miss anything.

Just went out to start the car and try to diagnose a problem I have been having with idle anyways, when I let the car idle it won't log but soon as I touch the throttle it logs fine. I went through all the overlay conditions in the settings tab and they're all set low enough to where it should read/...

Just add the columns you want and in the tools drop down use scalar setup.

Glad it worked out for you, have fun !

Got ya, looking at the .cal and log you have posted here the scalar in column 1 looks to be too high try lowering it.