eCtune

so i take it that ectune will know what the battery voltage is and will make the change i input accordingly, thats an awesome tool!!

im looking in the quick keys and one says \"quick adjust injector offset\". Is this for the injector battery offset?

tuning via crome pro, table timing peak was 23*. 22.75 in most of vtec. 1.00* retard IIRC. It was only my 2nd turbo motor that i had tuned so i made sure that i didnt bite off more than i could chew if you know what i mean. We ran out of time on the dyno due to wastegate installation issues by a sho...

what type of tires were you on at the track??? spinning the tires on the street puts a different load on the engine compared to a drag radial or slick hooking at the track, load changes the tune, thats why a loading dyno is so important. Also when there is not enough load(ie spinning street tires) ...

if the signal from your crank sensor and the signal from the dizzy don't line up properly it'll throw a crank sensor code. I had this issue on a H22 that was running a crank sensor on the crank, and had a movable dizzy.. when locked at 16.5 the dizzy should be at about 14.5 deg, then just add 2 to ...

are you on slicks or DR at the track?? spinning street tires compared to slicks or dr hooking at the track is a completely different load on the engine, more than likely a timing issue what ? you kind of lost me here. when you are spinning, you arent putting as much load on the engine compared to w...

Bindegal wrote:The various injectors are VERY different, and flow rating doesen´t necessarily matter. I would tune from the stock 240cc also... /Allan

why 240 and not the factory 290? Just curious

i wont have the car back til the end of the week but i'm hoping that i can get alot of stuff done this weekend. Summer classes start on monday and thats really gonna limit the amount of time i can put into it. I guess i'll just start with the 290cc and go from there. I will post the results when i g...

Has anyone tuned with the RDX injectors yet? I am running them in my h23vtec and i am currently making a basemap for the motor so i can get ectune started up. Would the RC 440's use similar offsets? thanks