eCtune

In relation to Ervin fix, wouldn't be enough to just tune ect correction tables? Or is there something wrong with ect fuel compensation? ECT corection tables don't work, i try them too and everything i could think of, but no improvement. this was the only way i fixed it and i can tell you nobody fr...

If you don't have any timing marks, you would need to do it youself. For this purpose you'll need dial indicator to check when piston 1 or 4 is on TDC.

why not using OEM used crank? For which car are you looking for? usually cranks are from $50 to $150, depends on aplication. Is it relly worth to go for new eagle for $600 or even more???

This is not old style GT30R (aka GT3076R), this is newer style turbo and manufacturer says it spools 1000rpms quicker. That is why i am asking if this turbo can spool bit faster Turbo is the newest addition to the Garrett Ball Bearing Line up. It fills in the requirements for small displacement 4 cy...

i am in process of building one turbocharged honda for one of mine customers. he is looking for good WHP, but he won't like to have spool at 5-6 K rpm (3500-4000 would be great for him) . We were looking for Gt2871R or GT3071r, both T3 .63 ehaust housing. Any experience when GT3071 will spool? setup...

i didn't said put somebody down and second: you wrote like he tuned your car yesterday. ok nevermind, tell me do you experience any water missing in the radiator? did you tried to raise idle with idle adjusting screw on the top of the throttle body? stock or aftermarket fuel pump?

I will tell you my experiences one day. i got one customer's d16Y8 built engine with GT2871R turbocharger and precision 680 or 780 injectors (i don't remember anymore). The car was then tuned with Hondata S300 system as in that time i couldn't get into eCtune tuner list (Calvin didn't like me for so...

PLX is my favourite WB. I am using it more than 5 years. I loved R-500 unit, but once on some customer's car i connect it wrong to the battery and fried it (he had his negative wire colored in red :(( ) Now i am using M-300 unit which is also very good, but i am missing extra features like egt and k...

shogun wrote:Very good work. The compression rate is very low (9 instaed of 11). Some knock appeared during tuning? Gas used is pompe gas(sp98 or sp95)?

no wa, no knock at all. gas was pump 98 octane (RON) european.

good numbers. I am making same setup like you for one customer's car and i would like to know how laggy this turbo is. When do you get 4psi of boost, at what rpm?

European Honda integra type r DC2 B18c6 engine JE 9:1 compression pistons (why so low???) Intercooler: laminova cores LHT kamikaze header 60mm exhaust (2.38\") fidanza cam gears short ram intake 68mm throttle body RC 440cc injectors 235WHP and 222Nm (163ftlb) on a MUSTANG DYNO http://i332.photobucke...

will you using stock O2 sensor? if you do then you can not use 15.5AFR ratio in closed loop area otherwise your fuel trim will go sky high.

Today i have tuned my first car on Ectune. I was using baserom version ect 2730059, ECU type RACE and P73 stock ITR basemap. I have put the car \"disable closedloop\" and \"disable closedloop and VE correction\" and i tuned it. When after finished tune i put it in closed loop i didn't see any stock ...