My B16 turbo semi-build
Moderator: Gaskleppie
- Civic VTI-Turbo
- Posts: 58
- http://phpbb3styles.net
- Joined: Sun Mar 09, 2008 8:12 am
- Location: Almere / The Netherlands
My B16 turbo semi-build
81,5mm Wiseco 9:0 pistons Eagle rods GSR cams Type-r intake 1000cc precission Walbro 255lph 70mm TB 2,5 ic piping Xs power intercooler APE Ramhorn Xs power t04e .63/.50 ar 38mm screamerpipe APE 3inch downpipe Greddy SP2 2,5inch catback EBC set @ 15 psi Pump gas! Ron 98 IAT temps(50+ Celcius) were very high! Because it was very hot inside.... Never the less, i made 347,3 Bhp with a quick tune....
Last edited by Civic VTI-Turbo on Tue Jul 07, 2009 11:45 am, edited 2 times in total.
van Drie Tuning eCtune authorized tuner the Netherlands
- Civic VTI-Turbo
- Posts: 58
- Joined: Sun Mar 09, 2008 8:12 am
- Location: Almere / The Netherlands
- [email protected]
- Posts: 22
- Joined: Thu Oct 04, 2007 11:09 pm
- Location: Georgia USA
-
- <font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
- Posts: 1632
- Joined: Tue Apr 03, 2007 2:17 pm
- Location: Houston Texas
I wouldn't recomend trying to max out that setup with that turbo.. You have a really nice setup it'd be a shame if you tore up your motor due to a ebay turbo compressor wheel desinegrating and going into your motor.. Get a good turbo, then crank that shit up!!!
Chris Delgado Tun'd Performance Houston Texas 713-962-8262
- Civic VTI-Turbo
- Posts: 58
- Joined: Sun Mar 09, 2008 8:12 am
- Location: Almere / The Netherlands
Yes, i've recently tried to upgrade the boost. But only 18,59 psi came out! And the EBC is set 100% fixed duty cycle... (strange?!) I'm looking for a real Garret T04e. So if anybody has 1, please do PM me. @ [email protected] No, stock sleeves.... I'm also having some problems with the engine. I've checked the compression etc.. everything is in good order! But he is spitting out all of his oil into the catchtank( at high rpms). Is this normal?! Edit, i'm using these plugs from B&R.Bugermass wrote:I wouldn't recomend trying to max out that setup with that turbo.. You have a really nice setup it'd be a shame if you tore up your motor due to a ebay turbo compressor wheel desinegrating and going into your motor.. Get a good turbo, then crank that shit up!!!
van Drie Tuning eCtune authorized tuner the Netherlands
- fah
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 94
- Joined: Tue May 20, 2008 11:09 am
- Location: Jamaica/Australia
nope he does not have to put them both back. My ENDYN breather kit came with the same two breathers which lead to the side of the can. There was a port in the bottom of the can which lead back to one of the two lines. Thus one of the lines was a "Y" allowing the oil to drain back into the engine. I ran my car like this for almost two years with no problems. If you do this and you are still breathing oil, then maybe you are getting blow-by or cracked a pistonSowler wrote:Remove that breather thats to the left of your oil filter that will be your problem. Preferably block them both back up and run two breathers from the front of the rocker cover.
Regards, Marlon Chong eCtune Team eCtune Authorized Tuner Location: Jamaica/Australia chong_marlon(at)yahoo.com (876)-881-8164 JA (61)-4-0275-3611 AUS
- Civic VTI-Turbo
- Posts: 58
- Joined: Sun Mar 09, 2008 8:12 am
- Location: Almere / The Netherlands
- Civic VTI-Turbo
- Posts: 58
- Joined: Sun Mar 09, 2008 8:12 am
- Location: Almere / The Netherlands
8,7 psi spring, was thinking of using a 13,5 psi spring.ed7_vti wrote:which spring you are using in the wastegate ? which boost you are running with EBC off ?Civic VTI-Turbo wrote:Yes, i've recently tried to upgrade the boost. But only 18,59 psi came out! And the EBC is set 100% fixed duty cycle... (strange?!)
van Drie Tuning eCtune authorized tuner the Netherlands
- DyeceDic73
- Posts: 11
- Joined: Fri Oct 02, 2009 10:37 pm
- Location: United States
- Contact:
My B16 turbo semi build
There are a few NA VX220s in the system but no Turbo ones. Perhaps someone like Thorney Motorsport can oblige and upload one for us as theyve surely done one.