243WHP 8:1Cr B16a

b20beast · Post by **b20beast** » Mon Mar 15, 2010 1:15 pm

Tial 38mm Wastegate Ebay Cast manifold Tial Bov 880cc injectors Walbro 225 spooling performance intercooler pipe. 2.25->2.5\" Precision 350hp intercooler garrett t3 t4 60 trim .63 type r cams.

Can anyone tell me why the torque is dropping off so hard up top?

Civic VTI-Turbo · Post by **Civic VTI-Turbo** » Mon Mar 15, 2010 2:28 pm

How is the boost? Is it stable?

b20beast · Post by **b20beast** » Mon Mar 15, 2010 3:33 pm

Civic VTI-Turbo wrote:How is the boost? Is it stable?

i attached a pic with the boost log...

EITCP · Post by **EITCP** » Tue Mar 16, 2010 1:44 pm

what kind of turbo manifold you have?

b20beast · Post by **b20beast** » Tue Mar 16, 2010 4:27 pm

EITCP wrote:what kind of turbo manifold you have?

Its a cast manifold.... like a ugr cast racing manifold

only mine isnt jet coated

Post by **Bugermass** » Wed Mar 17, 2010 12:10 am

send me your map I'll make changes and send it back..

Post by **Bugermass** » Wed Mar 17, 2010 12:11 am

or post it here..

b20beast · Post by **b20beast** » Wed Mar 17, 2010 8:19 am

Thanks buggermass!

Post by **Bugermass** » Wed Mar 17, 2010 7:57 pm

I'll dl and clean it up a little tommorrow.. Do me a favor and do a 3rd and or 4th gear pull if you can on a fresh set of plugs then take a pic and post it.. I need to see the ground strap.

b20beast · Post by **b20beast** » Wed Mar 17, 2010 8:19 pm

Bugermass wrote:I'll dl and clean it up a little tommorrow.. Do me a favor and do a 3rd and or 4th gear pull if you can on a fresh set of plugs then take a pic and post it.. I need to see the ground strap.

what are we looking for? DET or AFR?

Post by **Bugermass** » Wed Mar 17, 2010 11:37 pm

timing reference.

b20beast · Post by **b20beast** » Thu Mar 18, 2010 3:34 pm

Bugermass wrote:timing reference.

Do you think theres a flow restriction? boost leak or smtn?

Post by **Bugermass** » Thu Mar 18, 2010 11:22 pm

try this.. Keep an eye on your fueling I made some small changes. it should feel wayy smoother, but I'm pretty sure this is still conservative for the compression your running. also.. be SURE your timing is synced properly. lemme know how it goes. if you throw in a new set of plugs and do a couple runs then pull them and take pics I can help you get this thing dialed in.

JaredKaragen · Post by **JaredKaragen** » Fri Mar 19, 2010 2:58 am

You give free tuning over the Internet now??? >XD

Civic VTI-Turbo · Post by **Civic VTI-Turbo** » Fri Mar 19, 2010 3:49 pm

Timing looks much better now Burgermass....