243WHP 8:1Cr B16a
Moderator: Gaskleppie
-
- Posts: 224
- http://phpbb3styles.net
- Joined: Wed Dec 31, 2008 12:43 am
- Location: Trinidad
243WHP 8:1Cr B16a
Tial 38mm Wastegate Ebay Cast manifold Tial Bov 880cc injectors Walbro 225 spooling performance intercooler pipe. 2.25->2.5\" Precision 350hp intercooler garrett t3 t4 60 trim .63 type r cams. Can anyone tell me why the torque is dropping off so hard up top?
- Civic VTI-Turbo
- Posts: 58
- Joined: Sun Mar 09, 2008 8:12 am
- Location: Almere / The Netherlands
-
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 127
- Joined: Wed Jul 02, 2008 6:19 pm
- Location: www.tunerc.si
- Contact:
-
- <font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
- Posts: 1632
- Joined: Tue Apr 03, 2007 2:17 pm
- Location: Houston Texas
try this.. Keep an eye on your fueling I made some small changes. it should feel wayy smoother, but I'm pretty sure this is still conservative for the compression your running. also.. be SURE your timing is synced properly. lemme know how it goes. if you throw in a new set of plugs and do a couple runs then pull them and take pics I can help you get this thing dialed in.
- Attachments
-
- Adjusted Map.cal
- (8.19 KiB) Downloaded 242 times
Chris Delgado Tun'd Performance Houston Texas 713-962-8262
- JaredKaragen
- Posts: 1504
- Joined: Fri Nov 23, 2007 4:00 am
- Location: Bay Area, Ca
- Contact:
- Civic VTI-Turbo
- Posts: 58
- Joined: Sun Mar 09, 2008 8:12 am
- Location: Almere / The Netherlands