eCtune

84mm Gsr with ported B16 head, Gsr cams, 68mm turbo, 1000cc injectors, Rev Hard turbo manifold, Type R intake manifold, A1000 fuel pump, Pauter Rods, Endyn Pistons. 26lbs, the profec B wouldn't make anymore boost, it was cranked all the way even with 2 springs in the tial wg.. Tuned with Sunoco Maximal and of course ectune.

+++++++++++++++++

i know it'll break 700, i just need some more boost, waiting on getting the boost control options dialed in :edited due to me being a dumbass

why closeloop? This what we have now works great also

Like I said, that doesn't suck.

sewell94 wrote:84mm Gsr with ported B16 head, Gsr cams, 68mm turbo, 1000cc injectors, Rev Hard turbo manifold, Type R intake manifold, A1000 fuel pump, Pauter Rods, Endyn Pistons. 26lbs, the profec B wouldn't make anymore boost, it was cranked all the way even with 2 springs in the tial wg.. Tuned with Sunoco Maximal and of course ectune.

what da brand and spec of 68mm turbo thanks denn

The turbo took a dump on me, it was like 4 5 years old though. So we shoved a gt42 wheel in it when it was rebuilt, so hopefully by the end of the weekend i'll have some numbers with higher boost numbers.

cool! I have those solenoids in if you want to give that a shot also...

So new turbo was on the car today, i'd have some really big numbers for you guys BUT had a problem. At about 4400rpms i hear ting, engine dies, there is smoke everywhere, fills my shop up, i about shit my pants thinking the engine shit itself, i walk to the front of the car, and this piece of odd shaped metal is on the ground along with a bunch of pieces, i say to myself \" this didn't come from the engine, noway\". The F*cking turbine wheel broke off, yes the turbine wheel broke off. I have a st00pid style dp on my car and it went right though it. Every fin broke off of it, and there were pieces of metal everywhere. Looks like an eaten apple, i'll have some pic up tmw. Funny thing is that the compressor wheel still spins, with minimal shaft play but it does look like it hit the housing. Afrs were 11.7ish , egt's were normal. Plugs look perfect, i'm pretty sure the engines fine, i was too mad to do a compression and leakdown, but i'm pretty sure they'll be good. The brand new chra had 13 dyno pulls on it, gotta be a new shortness turbo lifespan record. I'm about 99.9999999% sure that it was a manufacture defect. We'll see what my turbo guy says tmw. I can't catch a break lately.

Pull the oil pan and check a couple bearings. When the turbine shaft broke your oil pressure dropped, and there is likely some trash in the oil to boot.

That sinking feeling in your gut when you hear noises like that is what will make you go bald like me

sewell94 wrote:So new turbo was on the car today, i'd have some really big numbers for you guys BUT had a problem. At about 4400rpms i hear ting, engine dies, there is smoke everywhere, fills my shop up, i about shit my pants thinking the engine shit itself, i walk to the front of the car, and this piece of odd shaped metal is on the ground along with a bunch of pieces, i say to myself " this didn't come from the engine, noway". The F*cking turbine wheel broke off, yes the turbine wheel broke off. I have a st00pid style dp on my car and it went right though it. Every fin broke off of it, and there were pieces of metal everywhere. Looks like an eaten apple, i'll have some pic up tmw. Funny thing is that the compressor wheel still spins, with minimal shaft play but it does look like it hit the housing. Afrs were 11.7ish , egt's were normal. Plugs look perfect, i'm pretty sure the engines fine, i was too mad to do a compression and leakdown, but i'm pretty sure they'll be good. The brand new chra had 13 dyno pulls on it, gotta be a new shortness turbo lifespan record. I'm about 99.9999999% sure that it was a manufacture defect. We'll see what my turbo guy says tmw. I can't catch a break lately.

Man that really sucks, well keep us posting on the condition of the motor.

I talked to my turbo guy, he said send it in. Its gonna be 3 weeks before i get it back though, but heres some pics, he said hes seen it a few times over the years, but didn't say anything else, i treid to coax an explanation outta him, but just got \"send it in\" anybody else seen anything like this??

Man that looks bad as if the fines where weak or polish to thin.