273.5 HP and 30.6kg TQ
Moderator: Gaskleppie
- ge0ne
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 147
- http://phpbb3styles.net
- Joined: Mon Apr 09, 2007 2:48 pm
- Location: Greece
273.5 HP and 30.6kg TQ
My teams Drag CRX is ready and retuned on eCtune, ready for the track next weekend... 273.5 HP and 30kg of torque!!! B series motor on ITB's. Dyno coming soon.
- Attachments
-
- crx031.jpg (569.46 KiB) Viewed 6419 times
-
- crx030.jpg (101.48 KiB) Viewed 6419 times
-
- crx029.jpg (126.85 KiB) Viewed 6419 times
Regards, George Nerantzis diasiq eCtune Team eCtune Authorized Tuner Location: All over Greece
- Gaskleppie
- <font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
- Posts: 1263
- Joined: Tue Apr 03, 2007 11:22 am
- Location: Netherlands
- Contact:
- ge0ne
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 147
- Joined: Mon Apr 09, 2007 2:48 pm
- Location: Greece
Class is FWD stock chassis, and any cc you want. 4 EGT sensors were a very helpful and convenient tool. You can tune the car almost perfect and have each cylinder running exactly the same, as long as you have 4 widebands installed :>
Regards, George Nerantzis diasiq eCtune Team eCtune Authorized Tuner Location: All over Greece
- xenocron
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 1012
- Joined: Wed Apr 04, 2007 7:00 pm
- Location: New Jersey
- Contact:
Very nice George
Regards, Xenocron Tuning Solutions eCtune Team eCtune Authorized Tuner Location: Ringwood, NJ / Hillburn, NY U.S.A. www.xenocron.com DIY ECU Chipping, Fuel Management Parts and more...
- ge0ne
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 147
- Joined: Mon Apr 09, 2007 2:48 pm
- Location: Greece
Me too so here goes. Crower 92mm crank kit with rods CP 85mm pistons yielding a 13:1 compression Crane race cams (No vtec) Crane roller rockers Ferrea full valvetrain (retainers springs valves locks) Bad thing Head is B16 and full stock otherwise (No port and polish at all) lots of power lost here Darton Sleeves MSD Sci ignition 4 EGT probes 4 Innovate widebands 63mm Top Fuel full titanium exhaust (only 2.5kg)!! Toda ITB's RC 370cc injectors Sard FPR Sard 280l/h fuel pump 421 custom header decat K sport suspension Avid Traction bar Avid motor mounts Quaiffe differential J1 CRX gearbox Koyo rad BF Goodridge T/A drag radials P30 ecu with eCtune Bad thing is engine bearings must be changed after each race cause they are not going to survive a second one
Regards, George Nerantzis diasiq eCtune Team eCtune Authorized Tuner Location: All over Greece
- Boosted K20
- Posts: 100
- Joined: Tue Apr 10, 2007 10:33 pm
- Location: New York
- ge0ne
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 147
- Joined: Mon Apr 09, 2007 2:48 pm
- Location: Greece
And build it. Lots and lots and LOTS of personal work. Today first day of the first day of greek drag championship. Car on second pass scored a 12.8 and lots of traction problems (did anybody mention traction control on ectune???) we are second right now on the times with the first one having a 12.78!!! pretty close, as things show we'll win Stay eCtuned.
Regards, George Nerantzis diasiq eCtune Team eCtune Authorized Tuner Location: All over Greece
- xenocron
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 1012
- Joined: Wed Apr 04, 2007 7:00 pm
- Location: New Jersey
- Contact:
I cant wait to get a ride
Regards, Xenocron Tuning Solutions eCtune Team eCtune Authorized Tuner Location: Ringwood, NJ / Hillburn, NY U.S.A. www.xenocron.com DIY ECU Chipping, Fuel Management Parts and more...