B16 auto tranny setup...
Moderator: Gaskleppie
-
- Posts: 83
- http://phpbb3styles.net
- Joined: Thu Dec 11, 2008 11:54 am
- Location: Michigan
B16 auto tranny setup...
I'm in a wheelchair and I have a B16 auto tranny setup. I have two p30 ecu's. Does Ectune work with my setup like crome?
- Gaskleppie
- <font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
- Posts: 1263
- Joined: Tue Apr 03, 2007 11:22 am
- Location: Netherlands
- Contact:
- Gaskleppie
- <font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
- Posts: 1263
- Joined: Tue Apr 03, 2007 11:22 am
- Location: Netherlands
- Contact:
- xenocron
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 1012
- Joined: Wed Apr 04, 2007 7:00 pm
- Location: New Jersey
- Contact:
The TCU controls a few different functions that I dont think would be possible with GPOs, but maybe. The ECU just tells the TCU when to go into lockout right?Gaskleppie wrote:ok, not without a auto control box.... sorry. cant this be made with a few GPO's and creative thinking?
Regards, Xenocron Tuning Solutions eCtune Team eCtune Authorized Tuner Location: Ringwood, NJ / Hillburn, NY U.S.A. www.xenocron.com DIY ECU Chipping, Fuel Management Parts and more...
- xenocron
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 1012
- Joined: Wed Apr 04, 2007 7:00 pm
- Location: New Jersey
- Contact:
With a B Series or H Series that has an external TCU, I usually recommend to customers to start with an Auto P75 ECU, add VTEC and leave it Auto. This is the only I KNOW has worked on setups. With D-Series, I dont believe there are any options...none of them came with TCUs that I know of.eg6auto wrote:It is a hydraulic controlled trans, so the ECU only controls lock-up solenoids. So the program will work, right? Which one to buy?
Regards, Xenocron Tuning Solutions eCtune Team eCtune Authorized Tuner Location: Ringwood, NJ / Hillburn, NY U.S.A. www.xenocron.com DIY ECU Chipping, Fuel Management Parts and more...
- Gaskleppie
- <font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
- Posts: 1263
- Joined: Tue Apr 03, 2007 11:22 am
- Location: Netherlands
- Contact:
fuel pump ?
Hello gents, I've had a Walbro 255 in the hatch since the swap. I've been getting poor fuel mileage. Would it be best if I put a stock fuel pump in, and retune until I'm boost'n?
- xenocron
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 1012
- Joined: Wed Apr 04, 2007 7:00 pm
- Location: New Jersey
- Contact:
Re: fuel pump ?
The pump shouldnt be a problem...if it is, you would be better off putting an adjustable regulator and fuel pressure gauge on the rail and bringing it down to 41 psi.eg6auto wrote:Hello gents, I've had a Walbro 255 in the hatch since the swap. I've been getting poor fuel mileage. Would it be best if I put a stock fuel pump in, and retune until I'm boost'n?
Regards, Xenocron Tuning Solutions eCtune Team eCtune Authorized Tuner Location: Ringwood, NJ / Hillburn, NY U.S.A. www.xenocron.com DIY ECU Chipping, Fuel Management Parts and more...
- xenocron
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 1012
- Joined: Wed Apr 04, 2007 7:00 pm
- Location: New Jersey
- Contact:
You have something else wrong then...
Regards, Xenocron Tuning Solutions eCtune Team eCtune Authorized Tuner Location: Ringwood, NJ / Hillburn, NY U.S.A. www.xenocron.com DIY ECU Chipping, Fuel Management Parts and more...