Injectors will be aprox halfway on the runners, like so; Throttle plate is aprox 42mm in size though because there are no throttle plates flow will be equal if not more as about 45mm which should be plenty for a n/a d-series. Lubrication isnt needed since the centerpiece is suspended in between the endcaps like shown here;cyanide wrote:Where do you plan on putting the injectors? And how big are those throttle bodies? Will they rotate using lubrication between the inside and outside "sections"?
D15Z6 ITB Rebuild
Moderator: Gaskleppie
-
- Posts: 14
- http://phpbb3styles.net
- Joined: Mon May 26, 2008 4:42 pm
- Location: The Netherlands
- Contact:
- Gaskleppie
- <font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
- Posts: 1263
- Joined: Tue Apr 03, 2007 11:22 am
- Location: Netherlands
- Contact:
Have you ever seen these barrel ITB's? If you want a set, you can stay in Holland and go to Eimert de Groot
- Attachments
-
- itbeimert3.gif (118.5 KiB) Viewed 1636 times
-
- itbeimert4.gif (121.76 KiB) Viewed 1636 times
-
- itbeimert1.gif (120.66 KiB) Viewed 1636 times
Regards, eCtune Team eCtune Authorized Tuner Location: The Netherlands