Page 1 of 1
eCtune Innovate logging...
Posted: Mon Mar 01, 2010 6:55 pm
by RadekSkylark
Hallo everyone, so, the question I have - can I connect my LM-2 with my usb cable to laptop, and use direct wb input in eCtune, and it will datalog all the stuff like AFR vs rpm and load? same as if it would be connected trought the ecu? Thanks
Posted: Mon Mar 01, 2010 7:01 pm
by jpjackson
yes, useing the serial output. if you dont have a serial port you need a serial to usb converter. this is the best way to log afr's, as the is no offset issues as you would have useing a input of the ecu.
Posted: Tue Mar 02, 2010 2:19 am
by RadekSkylark
but the LM-2 already has USB connector, it wont change things? everything will work? Thanks
Posted: Tue Mar 02, 2010 9:27 am
by jpjackson
yes, you should be able to hook it up and go. but make sure you follow these steps. 1. plug in the usb. 2. start car. 3. start ectune and assign com port. 4. connect emulator and datalogger. for some reason with the innovate stuff it wont save the com port so if the program is already running and you try to connect, it will no worky.