TB - No EVAP \"Nipple\"

civic4g · Post by **civic4g** » Mon May 31, 2010 12:58 pm

Hi My TB has EVAP \"nipple\" and hose connected to canister, if I buy a new TB without EVAP nipple it's OK to have the hose venting to atmosphere or because the the associated danger should I find an alternative way no connect it? Where please. Thanks in advance.

Vtec6000 · Post by **Vtec6000** » Mon May 31, 2010 5:02 pm

There won't be any issues with leaving the pipe off but if your very concerned then you could plumb it in to the air intake pipe.

JaredKaragen · Post by **JaredKaragen** » Mon May 31, 2010 7:31 pm

Leave it disconnected; it won't hurt much but the environment when the pcs is active. Most obd2 models flowed the evap in a different manner than obd1.

civic4g · Post by **civic4g** » Tue Jun 01, 2010 4:32 am

My first concern wasn't the environment, I was concerned with the flammability of the gases, is that not an issue?

Vtec6000 · Post by **Vtec6000** » Tue Jun 01, 2010 9:23 am

Highly unlikely

TopMountGSR · Post by **TopMountGSR** » Tue Jun 01, 2010 2:44 pm

We delete those carbon canisters on every setup that leaves here..