Euro Accord R?
Moderator: Gaskleppie
- Gaskleppie
- <font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
- Posts: 1263
- http://phpbb3styles.net
- Joined: Tue Apr 03, 2007 11:22 am
- Location: Netherlands
- Contact:
Euro Accord R?
Does any euro guy knows if you have to change the dizzy when you want to run a euro accord R (obd2b) on a P28?
Regards, eCtune Team eCtune Authorized Tuner Location: The Netherlands
Re: Euro Accord R?
No, but you should change the IACV.Gaskleppie wrote:Does any euro guy knows if you have to change the dizzy when you want to run a euro accord R (obd2b) on a P28?
HONDA Integra Type-R #00809
- Gaskleppie
- <font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
- Posts: 1263
- Joined: Tue Apr 03, 2007 11:22 am
- Location: Netherlands
- Contact:
Thanks, but I knew that one already. Right now the car is running on a p28 but I am getting the crank sensor error all the time. At Idle it stays away, but when driving this error keeps coming back. Maybe just a loose connector somewhere?
Regards, eCtune Team eCtune Authorized Tuner Location: The Netherlands
http://technet.ff-squad.com/ckftrick.htm should solve your problem
- Gaskleppie
- <font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
- Posts: 1263
- Joined: Tue Apr 03, 2007 11:22 am
- Location: Netherlands
- Contact:
- Bindegal
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 752
- Joined: Mon Jun 04, 2007 2:59 pm
- Location: Denmark
I have seen two different OBD2B implementations. One was a 99 euro Accord type R. The other an H22 Prelude. One difference between the two I noticed was the MAP sensor input. I have 2 kinds of OBD2B harnesses. Boomslang (green wires) works on the euro accord. The other one (grey wires) works on a 98 Prelude. Strange, eh? /Allan