Fastest fwd lap record @ Dover Race Way, JAMAICA

eCtuned Cars and their results

Moderator: Gaskleppie

User avatar
fah
<font color=green>eCtune Authorized Tuner</font>
Posts: 94
http://phpbb3styles.net
Joined: Tue May 20, 2008 11:09 am
Location: Jamaica/Australia

Fastest fwd lap record @ Dover Race Way, JAMAICA

Post by fah »

On Sunday during qualifying for the MP2 (Modified Production Class) at Dover Race Way Jamaica. Peter Jaggan Drove his eCtuned all-motor 1991 (B18 219whp/149ft-lb) Honda CRX to set the record for the fastest fwd lap time of 1:26.932.
Attachments
peter jagan - 2.jpg
peter jagan - 2.jpg (100.51 KiB) Viewed 18827 times
peter jagan - 1.jpg
peter jagan - 1.jpg (97.48 KiB) Viewed 18827 times
peter jagan - 3.jpg
peter jagan - 3.jpg (104.9 KiB) Viewed 18827 times
Regards, Marlon Chong eCtune Team eCtune Authorized Tuner Location: Jamaica/Australia chong_marlon(at)yahoo.com (876)-881-8164 JA (61)-4-0275-3611 AUS

User avatar
fah
<font color=green>eCtune Authorized Tuner</font>
Posts: 94
Joined: Tue May 20, 2008 11:09 am
Location: Jamaica/Australia

Post by fah »

backing out of the pits
Attachments
peter jagan.jpg
peter jagan.jpg (106.54 KiB) Viewed 18826 times
Regards, Marlon Chong eCtune Team eCtune Authorized Tuner Location: Jamaica/Australia chong_marlon(at)yahoo.com (876)-881-8164 JA (61)-4-0275-3611 AUS

User avatar
Gaskleppie
<font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
Posts: 1263
Joined: Tue Apr 03, 2007 11:22 am
Location: Netherlands
Contact:

Post by Gaskleppie »

Fastest lap time?? Whow! Congrats man. eCtune FTW! What are the rest of the engine specs?
Regards, eCtune Team eCtune Authorized Tuner Location: The Netherlands

User avatar
relic1
Posts: 188
Joined: Tue Apr 03, 2007 6:19 pm
Location: chicago burbs
Contact:

Post by relic1 »

Congrats!!
Gaskleppie wrote:What are the rest of the engine specs?
no kidding, a B18 with 149ft-lb?
this is my $0.02, keep in mind that I can't spell

User avatar
fah
<font color=green>eCtune Authorized Tuner</font>
Posts: 94
Joined: Tue May 20, 2008 11:09 am
Location: Jamaica/Australia

Post by fah »

relic1 wrote:Congrats!!
Gaskleppie wrote:What are the rest of the engine specs?
no kidding, a B18 with 149ft-lb?
Come on guys ...lol - B18B (LS) crank shaft in a B18C block - B18C header port and polished - Cosworth piston 12.5:1 comp. - Skunk2 Stage3 tuner Series cams - Hytech Replica Header - OBX ITB's Tuned on 103 octane
Last edited by fah on Wed Oct 21, 2009 4:41 pm, edited 1 time in total.
Regards, Marlon Chong eCtune Team eCtune Authorized Tuner Location: Jamaica/Australia chong_marlon(at)yahoo.com (876)-881-8164 JA (61)-4-0275-3611 AUS

User avatar
fah
<font color=green>eCtune Authorized Tuner</font>
Posts: 94
Joined: Tue May 20, 2008 11:09 am
Location: Jamaica/Australia

Post by fah »

The previous engine B20 vtec had made 240 whp/163lbft but the oil cooler had a leak, engine ran low on oil and got damaged. So the B18 was reinstalled as this was the bottom half that ge used to win his class championship last year. The B20 setup was very powerful... only wish he had more seat time with it.... i cant waite to see what lap times he will do when the B20 setup is ready again.
Regards, Marlon Chong eCtune Team eCtune Authorized Tuner Location: Jamaica/Australia chong_marlon(at)yahoo.com (876)-881-8164 JA (61)-4-0275-3611 AUS

EITCP
<font color=green>eCtune Authorized Tuner</font>
Posts: 127
Joined: Wed Jul 02, 2008 6:19 pm
Location: www.tunerc.si
Contact:

Post by EITCP »

skunk2 stag3 tuner cams are too big for this kind of engine. Maybe 86x95, but anything less with will loose power and torque untill 8000rpm compared to skunk pro2 cams. i also have a dyno plot to proove it, the car is owercammed :!:
---------------------------------- TUNERC team eCtune Authorised Tuner for Slovenia Passed ACP course at EFI University in Temecula, CA, November 07

User avatar
fah
<font color=green>eCtune Authorized Tuner</font>
Posts: 94
Joined: Tue May 20, 2008 11:09 am
Location: Jamaica/Australia

Post by fah »

EITCP wrote:skunk2 stag3 tuner cams are too big for this kind of engine. Maybe 86x95, but anything less with will loose power and torque untill 8000rpm compared to skunk pro2 cams. i also have a dyno plot to proove it, the car is owercammed :!:
well not in this case you are wrong :!: not every setup is the same not sure what you did wrong maybe u need to degree and dial in the cams or maybe yur compression is too low ... we used 12.5:1 pistons but the head was skimmed bring the compression to about 13:1 or a little more :D The car made good torque and mid range power... not lacking anything anywhere and the linear power proved it at the track. 8)
Regards, Marlon Chong eCtune Team eCtune Authorized Tuner Location: Jamaica/Australia chong_marlon(at)yahoo.com (876)-881-8164 JA (61)-4-0275-3611 AUS

User avatar
g.t engineering
Posts: 16
Joined: Fri Jul 04, 2008 9:15 am
Location: jamaica

Post by g.t engineering »

EITCP wrote:skunk2 stag3 tuner cams are too big for this kind of engine. Maybe 86x95, but anything less with will loose power and torque untill 8000rpm compared to skunk pro2 cams. i also have a dyno plot to proove it, the car is owercammed :!:
maybe your cr was too low.

User avatar
D.Oxync
Posts: 9
Joined: Fri Oct 02, 2009 3:17 pm
Location: United States
Contact:

Fastest fwd lap record Dover Race Way JAMAICA

Post by D.Oxync »

middle school i only know that our school has a mile record of 4:45 also county record and i dont know anything else. i did 56.4secs in the 400m last year but i dont know if that is a record or not because our school is like 60yrs old and they cant look it up

EITCP
<font color=green>eCtune Authorized Tuner</font>
Posts: 127
Joined: Wed Jul 02, 2008 6:19 pm
Location: www.tunerc.si
Contact:

Post by EITCP »

g.t engineering wrote:
EITCP wrote:skunk2 stag3 tuner cams are too big for this kind of engine. Maybe 86x95, but anything less with will loose power and torque untill 8000rpm compared to skunk pro2 cams. i also have a dyno plot to proove it, the car is owercammed :!:
maybe your cr was too low.
cr was 12.6:1, 85x89mm cams dialed on a dyno... whatever, if you think they make a good job, good for you.i know Larry Widmer the owner of Endyn told me few years ago skunk2 stage3 were first developed and used in accord racing team in h22 engines for circuit races with great success. Then skunk2 copied lobes and lift for b series engines but Larry told me every b series engine will be overcammed with those cams. i never knew untill i bought my own dyno and tested them myself...
---------------------------------- TUNERC team eCtune Authorised Tuner for Slovenia Passed ACP course at EFI University in Temecula, CA, November 07

User avatar
g.t engineering
Posts: 16
Joined: Fri Jul 04, 2008 9:15 am
Location: jamaica

Post by g.t engineering »

you need more than 12.6 cr to get good results out of those cams. lets see your dyno plot

EITCP
<font color=green>eCtune Authorized Tuner</font>
Posts: 127
Joined: Wed Jul 02, 2008 6:19 pm
Location: www.tunerc.si
Contact:

Post by EITCP »

Image darker skunk stg3, lighter skunk PRO2 on 85X89mm B20vtec with ITBS TWM
---------------------------------- TUNERC team eCtune Authorised Tuner for Slovenia Passed ACP course at EFI University in Temecula, CA, November 07

User avatar
fah
<font color=green>eCtune Authorized Tuner</font>
Posts: 94
Joined: Tue May 20, 2008 11:09 am
Location: Jamaica/Australia

Post by fah »

On sunday during qualifying Peter Jaggon lowered the FWD lap track record for Dover Race Way in Jamaica from 1:26.932 to 1:25.968
Regards, Marlon Chong eCtune Team eCtune Authorized Tuner Location: Jamaica/Australia chong_marlon(at)yahoo.com (876)-881-8164 JA (61)-4-0275-3611 AUS

dellas_ectune
Posts: 3
Joined: Thu Jan 14, 2010 12:51 pm
Location: Jamaica

Post by dellas_ectune »

Very respectable times at dover... Just for reference there is a well built and track tuned 450+ WHP EG civic running at the same track and the time to date is 1:27:xxx This car is running up there with many cars which are more powerful RWD/4WD configurations. Congrats to you and your team Fah..

Post Reply