7.6 at 98mph

eCtuned Cars and their results

Moderator: Gaskleppie

Post Reply
92redhatch
Posts: 113
http://phpbb3styles.net
Joined: Fri Apr 03, 2009 9:03 pm
Location: miami florida

7.6 at 98mph

Post by 92redhatch »

I took the hatch to my local 1/8 mile track and managed a 7.6 at 98 riding the limiter in third. Only managed a 1.89 60' I still haven't tamped the boost or setup boost by gear or full throttle shift. I think once I get that stuff working and raise the rev limit I'll be about to run a low 7 at 100+mph

User avatar
TopMountGSR
<font color=green>eCtune Authorized Tuner</font>
Posts: 606
Joined: Tue Apr 29, 2008 11:30 pm
Location: Frankfort KY
Contact:

Post by TopMountGSR »

Are you on slicks? What size and pressure? That hatch should cut some 1.6s fairly easy and I'd say that car will easily go bottom 7s at 105ish. PWM, no lift and gear corrections sure make things a bit easier. Good luck, its all in those 60fts brother.
DKGoodrich EFI Tuning Solutions eCtune Authorized Tuner Frankfort, KY, U.S.A. 859-421-3334 http://www.dkgoodrich.com Image

92redhatch
Posts: 113
Joined: Fri Apr 03, 2009 9:03 pm
Location: miami florida

Post by 92redhatch »

Shitty track. I was spinning first. My 24.5x9x13 had 8psi. Some seat time and boost by gear will definately help my 60'

92redhatch
Posts: 113
Joined: Fri Apr 03, 2009 9:03 pm
Location: miami florida

Post by 92redhatch »

I also had like 200lbs in tools and tires in my car lol

User avatar
TopMountGSR
<font color=green>eCtune Authorized Tuner</font>
Posts: 606
Joined: Tue Apr 29, 2008 11:30 pm
Location: Frankfort KY
Contact:

Post by TopMountGSR »

Its weird I cut my best 60 with 12 psi in mine, anything more it will hop some, anything less the 60ft increases. I'm hoping to work my pressure down and heat mine up some more this season. Good luck with your setup!
DKGoodrich EFI Tuning Solutions eCtune Authorized Tuner Frankfort, KY, U.S.A. 859-421-3334 http://www.dkgoodrich.com Image

92redhatch
Posts: 113
Joined: Fri Apr 03, 2009 9:03 pm
Location: miami florida

Post by 92redhatch »

Thanks I started off at 12 psi and worked my way down. I was cutting 2.0 60' at 12psi

92redhatch
Posts: 113
Joined: Fri Apr 03, 2009 9:03 pm
Location: miami florida

Post by 92redhatch »

Image

Post Reply