eCtune

11.5 @ 117.47 14 psi 90 civic a6/y8 D-sereis 14 psi 75mm vitara/fjt BEP t3/t4 50 trim .70 a/r stock head custom in house made turb manni

Looking good man! Have I seen you on D series . org? I thought I may have seen this forward mounted setup in a sig somewhere on there. Care to share the maps? and/or logs? I like the turbo mani, any pics of it? Cool setup man, great times. Good luck this season! DK

yes its on d-series.ill get the map off the lap top and send it to you. manni is made from sch 40.

That's bad ass, did you mig it? Hows it holdin up?

yes we mig'd it.it is holding up great.we did make a brace from the wastegate flange to one of the runners.i diddnt even have to hack any of my bumper to make it fit.

Looks good man, I want to order me some sch40 mild steel ells and mig one up to see how it holds up. Cutting the collector should be interesting. You make a jig in band or chop saw? I'd imagine that you'd have to have pretty stiff motor mounts for a forward facing setup. You should post the maps and well help you make it faster. Or send them to my email. There is a whole lot more in that setup. A ten sec pass could be made with it for sure.

I like this. Question though: How does the oil return set up look? It is hard to tell from the picks exactly how high the snail sits compared to the oil pan. Good work

the turbo does sit low.the oil drain from the turbo to the pan is mint with a slight slope to the pan.

yes topmountgsr we used a chop saw with a jig that we made.and my motor mounts are soild that we made(the one off the traction bar and the rear one)the other 2 are window welded.i will send you my map and log. thanks