nothing wrong but just a question

butch11a · Post by **butch11a** » Mon Oct 13, 2008 7:24 pm

how do you fit all those hardware inside the ecu with all those usb cables, is there a short usb a to b cable that can fit inside the ecu, or can you make them shorter...i'll be using a usdm box soon so i can have gear dependent boost control and i've been playing with the ecu, my extra ostrich and hulog, and usb hub and cables to see if i can get everything inside.....something that looks like a hondata box, with just one usb socket.....

butch11a · Post by **butch11a** » Mon Oct 13, 2008 7:29 pm

i also have a ground going to the battery directly and to the wideband and chassis, my cover has 3/8 in. plastic spacers for the cables to pass through.... how do you fit all those hardware inside the ecu with all those usb cables, is there a short usb a to b cable that can fit inside the ecu, or can you make them shorter...i'll be using a usdm box soon so i can have gear dependent boost control and i've been playing with the ecu, my extra ostrich and hulog, and usb hub and cables to see if i can get everything inside.....something that looks like a hondata box, with just one usb socket.....

butch11a · Post by **butch11a** » Mon Oct 13, 2008 7:32 pm

oops sorry, double post, i thought i just edited my post, can't seem to delete the first one...

JaredKaragen · Post by **JaredKaragen** » Tue Oct 14, 2008 11:38 pm

greasemonkee · Post by **greasemonkee** » Wed Oct 15, 2008 1:38 am

For a permanent setup: (hulog mounted under dash) Don't laugh at my antique tuning paraphernalia. And yes, it fits under the kick panel

butch11a · Post by **butch11a** » Wed Oct 15, 2008 7:14 pm

on the last picture, won't the ribbon cable get nicked or cut by the cover when its zip tied to the ecu housing and bolted as well? is the shrinkwrap enough to protect it?

JaredKaragen · Post by **JaredKaragen** » Wed Oct 15, 2008 9:05 pm

bend up the edge of the casing, or cut it away... easy as hell with pliers to bend it up and out of the way.

greasemonkee · Post by **greasemonkee** » Thu Oct 16, 2008 2:10 am

Rat tail file, flat bastard file, and electrical vinyl tape for insurance.

butch11a · Post by **butch11a** » Thu Oct 16, 2008 7:57 am

will try that, as soon as i get this cel light out...just changed to a usdm a/t box and i got a code 30, its in my other post.