Problem with setting row values
Posted: Fri Aug 22, 2008 4:40 am
NEw .cal, choose default settings, USDM P28 ECU, Maps from a P08. on the last row, try to increase RPM value to 1100, or 1000, or anything above 8.000.... it defaults back to 8.000... I was trying to set up the secondary tables (no VTEC) to activate at 5,000 RPM's so I can have better resolution in my maps above 5,500 RPM's.... but I brick-wall at 8,000... want to step it to 10,000. Thanks!