Page 1 of 1
Unexplicable Fuel Cut
Posted: Tue Jan 06, 2009 1:08 am
by Turbo3GLude
I am experiencing Fuel cut for unknown reasons. I have datalogs attached can someone look at them? Currently I have boost fuel cut set a 2psi and while in neutral reving to 3500 I experience fuel cut and I am not sure why. Can someone take a look at my datalog and chime in here. Thanks.
Posted: Tue Jan 06, 2009 6:53 am
by Gaskleppie
You have to put the .cal file here also. We cant read your .elf without it.
Posted: Tue Jan 06, 2009 2:20 pm
by delsoldude88
here is the cal
Posted: Tue Jan 06, 2009 4:20 pm
by Civic VTI-Turbo
Which \"rom\" did you use? .62 or .63?
Posted: Mon Jan 19, 2009 5:21 pm
by Piv
I had the same issue on saturday Trying to map a B16 ITBs with cams, pistons... And impossible to rev higher than 3500rpm If anyone got an idea ?
Posted: Mon Jan 19, 2009 5:51 pm
by calvin
itb is different play with mbar and tps in fuelcut settings
Posted: Tue Jan 20, 2009 8:50 pm
by Piv
Yes but as you can see the fuel cut is setting to 1800rpm, is it possible to happen everytime at 3500 with this setting ? I went back to England and the guy is in France, he should come next few weeks to get the car done but I need to know where its coming from
Posted: Wed Jan 21, 2009 12:10 am
by Bugermass
try rom .62 I think its that ICM thing..
Posted: Wed Jan 21, 2009 1:13 am
by calvin
ICM checkbox was removed from 63. 3500 can have to do with tps and or map
Posted: Wed Jan 21, 2009 11:46 am
by Bugermass
my CRX did the 3500RPM thing the other day on .63 I went back to .62 it worked fine.
Posted: Thu Jan 22, 2009 9:24 pm
by Piv
Bugermass wrote:my CRX did the 3500RPM thing the other day on .63 I went back to .62 it worked fine.
You were write, I sent an other EPROM with a .62 on it and it worked fine Thanks
Posted: Fri Mar 06, 2009 11:01 pm
by racepak
Piv wrote:Bugermass wrote:my CRX did the 3500RPM thing the other day on .63 I went back to .62 it worked fine.
You were write, I sent an other EPROM with a .62 on it and it worked fine Thanks
sry forthe dumb question but, what do you guys mean by .63 .62 ??
Posted: Fri Mar 06, 2009 11:28 pm
by Adam Hopkins
rom version