Page 1 of 1
Tip Out Trim, does it need negative (-) sign?
Posted: Sat Feb 07, 2009 11:32 am
by 2bfi
Got a simple question here. I'm wondering if the Tip Out trim value has to be entered as a negative number or not? In other words, if tip out is to subtract 10%, do I enter it as -10% or 10%
Posted: Sat Feb 07, 2009 10:29 pm
by calvin
-10
Posted: Sat Feb 28, 2009 9:53 pm
by 98vtec
ive got a question about tipout. Currently i have it set to -95% and a tip out disabled below 1900rpm. I have tried disabling fuelcut to properly tune the tip out columns but even taking the values to 0, i still get AFRS dipping into the low 12s and high 11's. When i accelerate eve the least bit hard and immediately put the clutch in and let off the gas, they can even go into sub 10 afr. Is there something i am doing wrong here?
Posted: Sun Mar 01, 2009 5:14 am
by greasemonkee
I have yet to see any change in tipout myself. Always pig rich even with it disabled.
Posted: Sun Mar 01, 2009 6:21 am
by b20beast
question on tip in and out what afr should we shoot for? how is this tuned?