Datalogs but not at idle...Injector Calibration issue

Support forum for eCtune software.

Moderator: Gaskleppie

Post Reply
Almighty-Si
Posts: 336
http://phpbb3styles.net
Joined: Sat Apr 14, 2007 2:46 am
Location: N.Y

Datalogs but not at idle...Injector Calibration issue

Post by Almighty-Si »

Just went out to start the car and try to diagnose a problem I have been having with idle anyways, when I let the car idle it won't log but soon as I touch the throttle it logs fine. I went through all the overlay conditions in the settings tab and they're all set low enough to where it should read/log at idle. I also noticed going into the Injector Calibration tool that hitting the +/- signs at the bottom would change Overall Fuel Trim and not the Injector Offset. Anyone else having these issues?

User avatar
jpjackson
Posts: 278
Joined: Mon Nov 09, 2009 3:41 pm
Location: jacksonville florida

Post by jpjackson »

do you have the overlay set to overlay in gear 0?
Universal Technical Institute Hot rod University graduate ASE Master Certified Automotive Tech Honda and Acura factory certified 9 years and counting in the automotive field

Almighty-Si
Posts: 336
Joined: Sat Apr 14, 2007 2:46 am
Location: N.Y

Post by Almighty-Si »

jpjackson wrote:do you have the overlay set to overlay in gear 0?
Yep...I triple checked all my settings before I posted just to make sure I didn't miss anything.

User avatar
jpjackson
Posts: 278
Joined: Mon Nov 09, 2009 3:41 pm
Location: jacksonville florida

Post by jpjackson »

WEIRD post a screen shot of your overlay tab so i can take a look. i had a weird problem a while back, mine wouldnt overlay at idle either, and i did somthing but i do not remember at the moment but i will try to. i was playing with the settings in the overlay tab.
Universal Technical Institute Hot rod University graduate ASE Master Certified Automotive Tech Honda and Acura factory certified 9 years and counting in the automotive field

User avatar
calvin
<font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
Posts: 4816
Joined: Tue Apr 03, 2007 10:16 am
Location: Paramaribo, Suriname
Contact:

Post by calvin »

should be a setting if it logs afr to grid in other gears
Regards, eCtune Team eCtune Authorized Tuner Location: Caribbean & Suriname aim:calvinPGMFI skype:ectune We remote connect to your laptop if you have problems. Best support in the world.

User avatar
jpjackson
Posts: 278
Joined: Mon Nov 09, 2009 3:41 pm
Location: jacksonville florida

Post by jpjackson »

thats what i figured. make sure in the overlay settings you have gear 0 selected, if not it wont log at idle
Universal Technical Institute Hot rod University graduate ASE Master Certified Automotive Tech Honda and Acura factory certified 9 years and counting in the automotive field

Almighty-Si
Posts: 336
Joined: Sat Apr 14, 2007 2:46 am
Location: N.Y

Post by Almighty-Si »

I ran another force update when I made this post but I haven't tried it yet. Anyways here is the screen shot...
Attachments
eCtune.JPG
eCtune.JPG (203.65 KiB) Viewed 3880 times

User avatar
calvin
<font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
Posts: 4816
Joined: Tue Apr 03, 2007 10:16 am
Location: Paramaribo, Suriname
Contact:

Post by calvin »

remove check fuelcut and try looks good though
Regards, eCtune Team eCtune Authorized Tuner Location: Caribbean & Suriname aim:calvinPGMFI skype:ectune We remote connect to your laptop if you have problems. Best support in the world.

User avatar
VTEC Inside
Posts: 56
Joined: Thu Aug 21, 2008 8:41 am
Location: Bulgaria
Contact:

Post by VTEC Inside »

May be a good idea to change the TPS to start from -1% or -2%. May be at idle ECU sees TPs under 0.

Post Reply