Innovate lm2

cain_tuned · Post by **cain_tuned** » Wed Jan 19, 2011 12:21 pm

can i serial log with the lm2 directly with the lm2

cain_tuned · Post by **cain_tuned** » Thu Jan 20, 2011 3:15 pm

anyone

rich777 · Post by **rich777** » Thu Jan 20, 2011 4:43 pm

With the UBS cable ? Yes

cain_tuned · Post by **cain_tuned** » Thu Jan 20, 2011 8:31 pm

the one that comes with the lm2 . it comes up under game controlers not com ports or do i have to make a cable .

JaredKaragen · Post by **JaredKaragen** » Fri Jan 21, 2011 5:33 pm

I will be receiving my lm2 shortly. My guess is it's going to work on an auxiliary port for daisy-chained devices; not the built in USB... I could be wrong though. I myself need this feature to interface my lm2 with an ot2 so I can log on the go with my iPhone and not use the logger in the lm2. I want to be able to review the log on my phone not pc.

cain_tuned · Post by **cain_tuned** » Sat Jan 29, 2011 3:19 am

so no one knows if the lm2 direct serial logs i use it in neptune and would like to use it in eCtune

cain_tuned · Post by **cain_tuned** » Sun Jan 30, 2011 3:40 pm

Post by **Gaskleppie** » Sun Jan 30, 2011 5:10 pm

I thought it worked. Not 100% sure though....

cain_tuned · Post by **cain_tuned** » Sun Jan 30, 2011 10:03 pm

any one try it yet

GotBoost · Post by **GotBoost** » Fri Feb 11, 2011 12:43 am

Yes it works, via USB anyway.

JaredKaragen · Post by **JaredKaragen** » Fri Feb 11, 2011 6:04 am

Correct. I have had mine for a few weeks... tunes a few cars... I love it! I even diagnosed a no-start when hot... when everyone wanted to replace dizzy, I replaced ECT... being the 6th mechanic to see the car made him extatic to be able to drive with no fear of a no hot/warm start condition.

cain_tuned · Post by **cain_tuned** » Sat Apr 16, 2011 1:52 am

what all do i need to serial log with LM2 do i have to download the sdk file on innovat. site im not sure, in neptune i just downloaded the sdk and then bam it worked

marshall.hagen · Post by **marshall.hagen** » Sat Apr 16, 2011 11:46 am

To get the new Innovate MTX-L to work with eCtune: -I installed Logworks and the drivers on the CD that came with the kit -Plugged in my serial/usb converter -Used device manager to see what COM port was default -Selected that COM port in eCtune with 'Serial Logging' enabled Simple as that, and it worked... Windows 7 box as well.