NB <> WB closeloop

Civic Tsi · Post by **Civic Tsi** » Mon Jul 16, 2007 3:22 pm

Toggling from one to the other messes the trim values (min, max and O2 trim)

Post by **Gaskleppie** » Mon Jul 16, 2007 6:13 pm

Thats right! Because if you dont change those parameters too, close loop with a wideband can go out of hand if you let them stay at the normal settings. These are the best recommended and tested settings. You can adjust them if you want.

Civic Tsi · Post by **Civic Tsi** » Mon Jul 16, 2007 6:22 pm

Correct but they should change back to default. When changing from WB 2 NB, min goes to 0 instead of 0.7, max change to 1 instead of 1.47 & fuel trim change to 0 instead of 1. Engine does not idle with those settings.

Post by **Gaskleppie** » Tue Jul 17, 2007 1:02 am

ok...

Post by **calvin** » Tue Jul 17, 2007 10:57 am

you are working with multipliers still? i'll verify now. Multiplier in % mode: Works as it should when nb->wb->nb Multiplier in . mode: Bugged:) Fixing now Fixed

Post by **calvin** » Fri Jul 27, 2007 1:08 am

fixed in 0019r2