will not connect to ecu

Garrett · Post by **Garrett** » Wed Jul 30, 2008 10:22 pm

Is the car start without ostrich J1 is not there

fireztorm · Post by **fireztorm** » Wed Jul 30, 2008 10:26 pm

what do you mean?

Garrett · Post by **Garrett** » Wed Jul 30, 2008 10:28 pm

When J1 is ON (with a jumper) the ecu use the ROM in the socket not in the OKI if J1 is OFF(without a jumper) the ecu use the ROM IN the OKI

fireztorm · Post by **fireztorm** » Wed Jul 30, 2008 10:30 pm

ok, then i guess its there, because i havent done anyting to the j1.

Garrett · Post by **Garrett** » Wed Jul 30, 2008 10:32 pm

fireztorm wrote:ok, then i guess its there, because i havent done anyting to the j1.

take a look at

fireztorm · Post by **fireztorm** » Wed Jul 30, 2008 10:43 pm

what type ecu is on the picture? usdm?

fireztorm · Post by **fireztorm** » Wed Jul 30, 2008 10:45 pm

ok, i found the J1 it is without a jumper..

Garrett · Post by **Garrett** » Wed Jul 30, 2008 10:46 pm

install a jumper and welcome in eCtune world

sohcd16y8 · Post by **sohcd16y8** » Wed Jul 30, 2008 10:47 pm

Theres your problem, simple enough. Just add the jumper back in and enjoy eCtune.

sohcd16y8 · Post by **sohcd16y8** » Wed Jul 30, 2008 10:47 pm

Garrett wrote:install a jumper and welcome in eCtune world

Haha, beat me to it!

fireztorm · Post by **fireztorm** » Wed Jul 30, 2008 10:50 pm

nice!

i will try that first ting in the morning.. tired now.. but why havent i been informed to this before? i have read the troubleshooting guide.. and how to install the ostrich on moates.net. but i havent heard about this before..

sohcd16y8 · Post by **sohcd16y8** » Wed Jul 30, 2008 11:04 pm

When an ecu is chipped, it is assumed that the jumper is installed. By not having the jumper, you are are running off the factory settings so technically, you are not chipped.

fireztorm · Post by **fireztorm** » Wed Jul 30, 2008 11:07 pm

ok, but i still have problems with my datalogging. or does this fix that to? it tells me that i cannot connect to the ecu. i have cut j12 and im running a hulog extreme. what can be wrong here?

sohcd16y8 · Post by **sohcd16y8** » Wed Jul 30, 2008 11:12 pm

It shoudl all be fixed once your running eCtune.

fireztorm · Post by **fireztorm** » Wed Jul 30, 2008 11:14 pm

ok, thanks!

i will try tomorrow.