B18C6 basemap

shogun · Post by **shogun** » Mon Oct 20, 2008 4:41 pm

I checked for b18c6 basemap in ectune today. I just want to have informations about it: it was originally created on a 100% stock engine? created on dyno? vtec is 4875 rpm instead of 5700 in p73 stock ecu. Goog value which lets me think this basemap is a dyno tuned one. Right? (basemap in ectune seems not being related to stock one but very specifics to ectune). why rev limiter is 8116 rpm instead of 8600 rpm in stock ecu?

JaredKaragen · Post by **JaredKaragen** » Mon Oct 20, 2008 6:00 pm

You say you created your basemap, but your asking questions about it? I am sort of lost on the details of your question =) They counter-act each other.

butch11a · Post by **butch11a** » Mon Oct 20, 2008 7:04 pm

i think he made his basemap and is asking why the default values in ectune is different from the type r ecu....

shogun · Post by **shogun** » Mon Oct 20, 2008 8:54 pm

butch11a wrote:i think he made his basemap and is asking why the default values in ectune is different from the type r ecu....

that's it

butch11a, when I say I created my base map, I just choose the basemap for b18c6 pre-installed in ectune, like it's necessary as a normal step when you start ectune and create a new file. I want to know how calvin created this "pre-installed calibration" and how values were decided compared to stock values (if the ITR used was 100% stock or slighlty modified). Sorry if you misundertanding me, my english is so bad (I'am french). I'have edited my original post which was not very clear.

Post by **calvin** » Mon Oct 20, 2008 9:11 pm

i have to check how rev limit and vtec is stored. it's not a cal it's just the ign/fuel tables to my believe i'll have a look again

Garrett · Post by **Garrett** » Tue Oct 21, 2008 7:12 pm

I don't know how the base map are done but I compared a Stock P75 ECU saturday to the eCtune P75 cal alot different in AFR

Post by **calvin** » Tue Oct 21, 2008 7:26 pm

stock injectors? the FV are just copied from P75 and the code is the same as P72... should be close....

Garrett · Post by **Garrett** » Tue Oct 21, 2008 7:33 pm

calvin wrote:stock injectors? the FV are just copied from P75 and the code is the same as P72... should be close....

Yes stock injectors

shogun · Post by **shogun** » Thu Oct 23, 2008 11:27 am

shogun wrote:I checked for b18c6 basemap in ectune today. I just want to have informations about it: it was originally created on a 100% stock engine? created on dyno? vtec is 4875 rpm instead of 5700 in p73 stock ecu. Goog value which lets me think this basemap is a dyno tuned one. Right? (basemap in ectune seems not being related to stock one but very specifics to ectune). why rev limiter is 8116 rpm instead of 8600 rpm in stock ecu?

Some news?

B18C6 basemap

B18C6 basemap

Re: B18C6 basemap