My Evaluation Notes...

Post by **calvin** » Fri Dec 21, 2007 10:42 am

just mailed it to you.. EPS file

JaredKaragen · Post by **JaredKaragen** » Fri Dec 21, 2007 1:31 pm

Awesome. I will email it to the print shop... because ECTune needs some advertisement =) Once enough people start seeing it's influence it will probably really soar. What would be a good size? 4\"x2\" or 2\"x1\"? I might consider making a batch of 100, and maybe sending a grip to whomever it is that had the ECTune boost controllers made.... it would make a cool \"throw-in\" for the purchase of one.... just a thought. I will get figures on sticker prices for you guys if you are interested: and of-course, Calvin, Burgermass, and Xenocron will get some free sticks cause I have known em from pgmfi for a whille now... =D

Bindegal · Post by **Bindegal** » Fri Dec 21, 2007 2:49 pm

ThereÂ´s a hi-res graphics file now? If so, please send it, IÂ´d like to have some shirts and stickers made here as well. /Allan

JaredKaragen · Post by **JaredKaragen** » Fri Dec 21, 2007 6:24 pm

I wouldn't call it high-res... it's 72x43 pixels.... so Im gonna email him back to see if he accidentally sent the wrong one =)

Bindegal · Post by **Bindegal** » Fri Dec 21, 2007 7:00 pm

DÂ´oh, its probably the same one I got then. The one I have is only just good enough to use in a small size on a business card... /Allan

Post by **calvin** » Fri Dec 21, 2007 7:04 pm

nate can u make a big vector drawing?

Post by **nate** » Sat Dec 22, 2007 12:23 am

Yeah I'll see what I can come up with

JaredKaragen · Post by **JaredKaragen** » Wed Jan 16, 2008 4:17 am

I have been playing around with eCtune recently after being able to finally get my base timing dead-on... not close; And I have run into something rather strange. on my logs, being N/A constantly, I am seeing ~2.5PSI of boost; Ill post the latest log I have in the next post when I get to my tuning laptop but it is baffling me; I have tried a total of 3 MAP sensors, all with the same readings. Odd.... I am running my boost maps; but for some reason; the AFR's are as I tuned them before, but the logger is seeing posative pressure. It is an OEM MAP on the TB (Z6).

Post by **calvin** » Wed Jan 16, 2008 6:09 am

Settings->Unit->Mbar Sealevel(u can see use PA) or write down(1024mBar)

RoadXY · Post by **RoadXY** » Wed Jan 16, 2008 1:52 pm

Looking at this... When I look (with my datalogger version) at Parameters - Sensor/Hardware Options I see that my PA sensor is disabled. (For the record, I have an USDM P06) But when I look at Settings - Units I can enable the PA sensor. The help-text at the checkbox tells me that the baro-sensor should also be enabled in my rom-options (wich obvisiously it currently isn't). What's the difference between those 2? Why can I enable the checkbox at the Settings-unit when it's disabled at my rom options?

Post by **calvin** » Wed Jan 16, 2008 6:30 pm

IN settings is the mbar value used to calculate mbar to PSI... if u have a PA i can use the PA value the ecu uses(sensor should be active in the rom;rom option page)

JaredKaragen · Post by **JaredKaragen** » Wed Jan 16, 2008 7:44 pm

I do have the PA active, but I am still unsure why I am seeing ~2PSI of boost... I haven't been able to get to my tuning laptop in the past few days, I will try and get a log up tonight; it's almost as if the MAP is not calibrated correctly; but I made sure I had the OEM sensor selected, and also want to note that i tried making a new cal, and it still showed ~2PSI. I will see what I can do to figure this out.

Post by **calvin** » Wed Jan 16, 2008 9:10 pm

remove PA checkbox and try 1024 mbar

JaredKaragen · Post by **JaredKaragen** » Fri Jan 18, 2008 6:33 pm

I'll try that right now; I ahev been missing a few days; got all 4 of my huge wisdome teeth pulled out the other day. My altitude is ~355 Ft above seal level.

JaredKaragen · Post by **JaredKaragen** » Sat Jan 19, 2008 1:42 am

Ok, turning the PA off fixed things... odd it would do this.