ROM 49 (R8 T5) bug report
Moderator: Gaskleppie
- Bindegal
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 752
- http://phpbb3styles.net
- Joined: Mon Jun 04, 2007 2:59 pm
- Location: Denmark
ROM 49 (R8 T5) bug report
I didn´t have nearly enough time to do a full test today, but I managed to find a bug. ROM 49 is unable to start up properly on my own race car. Tested on 46, 47 and 48.1 as well - all booted without problems. Symptoms - with ROM 49 and my usual CAL, this happens at KOEO: 1) Check engine lights for the usual duration. 2) Immediately after that (at the time I had expected the usual two check engine light \"blips\"), I hear my boost solenoid clicking for a couple of seconds (during this, check engine light is off), 3) then the clicking stops, and Check Engine light remains on. 4) At this point, the datalogging in eCtune connects/disconnects continuously at about a 1 second interval. At no time did I see the two \"blips\" on ROM49. I can re-test later (probably in the weekend) on another car/ECU. Now, assuming ROM 49 has been tested before, I have a wild guess.... I have my EGT logging converter connected to the D12/EGR lift input. On stock code, the ECU will not boot up unless voltage on this input is normal = 2.5 volts. A while back, this was the case for the eCtune ROM as well, but you fixed it. Could this have become \"unfixed\" again somehow? One positive note - auto detect worked flawlessly on R8 T5. /Allan
-
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 283
- Joined: Tue Nov 13, 2007 7:13 pm
- Location: Murfreesboro Tn
I experienced the data logging oddity also, I also noticed I had some issues with the check engine light, not the same as you, Mine would stay solid, Then it would start working, I did see the two blips some times. Not every time. Also the fuel pump would not prime correctly every time I cycled the ignition. I also noticed the tps based service connector did not work. I thought this was an issue with the ecu, I guess not. Calvin I did not get the car I was supposed to do yesterday because I was having these issues, I thought it was his ecu, so I told him I was going to get my ecu and test. So I am going back today to try with a 48 rom on his computer, If you need me to test anything I would be glad to, E-mail me if you need anything, Hope this helps!
- Synoptic
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 312
- Joined: Wed Apr 04, 2007 11:48 am
- Location: Montreal, Quebec
I street tuned a D16Z6 yesterday with this rom. The car was stock + turbo. I had no problem and I was using the ELD pin as WB input.
Synoptic Tuning Regards, eCtune Team eCtune Authorized Tuner Location: Montreal, Quebec, Canada
-
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 283
- Joined: Tue Nov 13, 2007 7:13 pm
- Location: Murfreesboro Tn
- Bindegal
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 752
- Joined: Mon Jun 04, 2007 2:59 pm
- Location: Denmark
I agree, this cannot be O/S related. Remember, earlier ROM versions booted the ECU fine during my tests. Either way, this was done on XP... Good to hear that at least Nick has no problems with it. It would be good to hear from others too - maybe this could help in narrowing down on what ever is causing this. /Allan
- xenocron
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 1012
- Joined: Wed Apr 04, 2007 7:00 pm
- Location: New Jersey
- Contact:
I had a problem like this starting FRESH with a 49 ROM remember Calvin...I had to go back and use the ROM which you and I had setup although the one we used was a 49 ROM
Regards, Xenocron Tuning Solutions eCtune Team eCtune Authorized Tuner Location: Ringwood, NJ / Hillburn, NY U.S.A. www.xenocron.com DIY ECU Chipping, Fuel Management Parts and more...
-
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 283
- Joined: Tue Nov 13, 2007 7:13 pm
- Location: Murfreesboro Tn
- xenocron
- <font color=green>eCtune Authorized Tuner</font>
- Posts: 1012
- Joined: Wed Apr 04, 2007 7:00 pm
- Location: New Jersey
- Contact:
Send me the modified ROM? I still have the problem starting with a fresh 49 base.
Regards, Xenocron Tuning Solutions eCtune Team eCtune Authorized Tuner Location: Ringwood, NJ / Hillburn, NY U.S.A. www.xenocron.com DIY ECU Chipping, Fuel Management Parts and more...
- calvin
- <font color=gray>Site Admin</font><br><font color=green>eCtune Authorized Tuner</font>
- Posts: 4816
- Joined: Tue Apr 03, 2007 10:16 am
- Location: Paramaribo, Suriname
- Contact:
rom 50 and 51 are reported good what i see from the test xls sheet people(testers) are sending in. closing this up
Regards, eCtune Team eCtune Authorized Tuner Location: Caribbean & Suriname aim:calvinPGMFI skype:ectune We remote connect to your laptop if you have problems. Best support in the world.