mismatched afr

Post by **calvin** » Wed Feb 13, 2008 9:08 pm

did u try the lastest i mailed to u to see if you detonation or strange issues is gone. Lean protection is not enabled by default

yc underground · Post by **yc underground** » Thu Feb 14, 2008 3:26 am

on the one i tested lean protection is enable by default

Civic Tsi · Post by **Civic Tsi** » Thu Feb 14, 2008 9:19 am

When creating a new map, lean protection is disable by default but when opening an \"old\" calibration, lean protection 2 is automatically activated. This is on version r0 t3.

civic4g · Post by **civic4g** » Fri Feb 15, 2008 4:59 pm

did u try the lastest i mailed to u to see if you detonation or strange issues is gone.

Will test tonight

Post by **calvin** » Fri Feb 15, 2008 9:07 pm

Civic Tsi wrote:When creating a new map, lean protection is disable by default but when opening an "old" calibration, lean protection 2 is automatically activated. This is on version r0 t3.

i'll look into that.

civic4g · Post by **civic4g** » Fri Feb 15, 2008 11:06 pm

Hi Tested the latest version you sent me, the problem is still there. At idle i can see the rpm dial droping like ignition cut has been activated. Can't tell you if it's detonation or misfire, don't know how to identify. After that switched to 0.0.2.0 r8 (rom 0.046) and everything run smooth.