Results From My Dyno Session 3/22
Moderator: Gaskleppie
-
- Posts: 336
- http://phpbb3styles.net
- Joined: Sat Apr 14, 2007 2:46 am
- Location: N.Y
Results From My Dyno Session 3/22
Well I have to say I am very pleased overall. There was more to be made at 10psi but about 3 runs in I lost the gasket to the bottom of the wastegate and boost started to act funnier after ever pull so I thought it would be best to pack it in and call it a day. 5.7psi (wastegate pressure) 10psi Car is a 99 Civic Si, Stock motor with somewhat of a GReddy kit on it. Neukin Ramhorn Manifold GReddy18G Turbo Neukin 2.5 inch Downpipe w/recirc dumptube Tial 38mm Wastegate 2.5 inch Resonated Test pipe 2.5 inch Exhaust etc....
Last edited by Almighty-Si on Tue Mar 25, 2008 12:30 am, edited 1 time in total.
-
- Posts: 336
- Joined: Sat Apr 14, 2007 2:46 am
- Location: N.Y
- Boosted K20
- Posts: 100
- Joined: Tue Apr 10, 2007 10:33 pm
- Location: New York
-
- Posts: 336
- Joined: Sat Apr 14, 2007 2:46 am
- Location: N.Y
- Boosted K20
- Posts: 100
- Joined: Tue Apr 10, 2007 10:33 pm
- Location: New York
-
- Posts: 336
- Joined: Sat Apr 14, 2007 2:46 am
- Location: N.Y
- Boosted K20
- Posts: 100
- Joined: Tue Apr 10, 2007 10:33 pm
- Location: New York
-
- Posts: 336
- Joined: Sat Apr 14, 2007 2:46 am
- Location: N.Y
-
- Posts: 21
- Joined: Sat Jan 05, 2008 4:33 am
- Location: NJ
-
- Posts: 336
- Joined: Sat Apr 14, 2007 2:46 am
- Location: N.Y
Well I didn't see any Vipers there but there were a few Vettes there, pretty sure that's the same place. They charged me $100 per hour without A/F which really didn't bother me since I have my own anyways, so not too terrible.turbine tuning wrote:lol u went to that shop that does vipers or corvettes right? the dyno is closed off in a sound proof room i believe. they charge too much per hour.
- Boosted K20
- Posts: 100
- Joined: Tue Apr 10, 2007 10:33 pm
- Location: New York